利用温拉伸实验和金相实验,系统研究了双相钢激光拼焊板温拉伸过程中温度、拉伸性能及微观组织三者之间的相互关系.结果表明:随着温度的升高,双相钢激光拼焊板真实应力-应变曲线下降,抗拉强度降低,延伸率升高;温拉伸条件下双相钢激光拼焊板的断裂位置处于焊缝部位,且焊缝组织发生明显变化,随着温度的升高,焊缝中的树枝晶逐渐消失,板条马氏体最终转变为细小的等轴状铁素体;不同温度下焊缝拉伸断口均为韧窝断裂,且随着温度升高,韧窝尺寸变大,深度变深.
参考文献
| [1] | Prodromos Tsipouridis;Ewald Werner;Christian Krempaszky .Formability of High Strength Dual-phase Steels[J].Steel Research International,2006(9/10):654-667. |
| [2] | 马鸣图;吴宝榕.双相钢--物理和力学冶金[M].北京:冶金工业出版社,2009 |
| [3] | BHATTACHARYA D .Developments in advanced high strength steels[J].Iron & Steel Supplement,2005,40:69-75. |
| [4] | 陈炜,彭志刚,侯波,贝建伟,冯华云.激光拼焊板成形极限图的理论建立方法[J].机械工程学报,2009(04):183-186,191. |
| [5] | L. C. Chan;S. M. Chan;C. H. Cheng .Formability and Weld Zone Analysis of Tailor-Welded Blanks for Various Thickness Ratios[J].Journal of engineering materials and technology,2005(2):179-185. |
| [6] | HARTLEY B;ONO M.Laser weldability of dual phase steels in tailored blank applications[A].Detroit,Michigan,USA,2002 |
| [7] | 迟剑锋;吴山力.材料成形技术基础[M].长春:吉林大学出版社,2001 |
| [8] | Serkan Toros;Fahrettin Ozturk;Ilyas Kacar .Review of warm forming of aluminum-magnesium alloys[J].Journal of Materials Processing Technology,2008(1/3):1-12. |
| [9] | 陈炜,盛杰,蔡艳,俞海良,吴晓峰.HSA 340高强度钢激光拼焊板焊缝组织与拉伸性能分析[J].塑性工程学报,2008(05):163-167. |
| [10] | Sushanta Kumar Panda;D. Ravi Kumar;Harish Kumar;A. K. Nath .Characterization of tensile properties of tailor welded IF steel sheets and their formability in stretch forming[J].Journal of Materials Processing Technology,2007(2/3):321-332. |
| [11] | 雷玉成,朱强,陈炜,程晓农.高强度钢差厚板激光拼焊焊缝成形及组织分析[J].焊接学报,2007(08):9-12,16. |
| [12] | 崔约贤.金属断口分析[M].哈尔滨:哈尔滨工业大学出版社,1998 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%