采用新型电火花沉积设备,把WC-15Co电极材料沉积在铸钢轧辊材料上,制备WC-15Co沉积涂层,研究其微观组织及耐磨性能.结果表明:沉积层主要由Fe3W3C, Co3W3C, Fe和 Fe2C等相组成;沉积层与基体冶金结合, 沉积层中Fe3W3C, Co3W3C和 Fe2C等硬质相弥散分布在基体Fe上,部分区域硬质相达到了纳米颗粒尺寸;沉积层硬度分布不均匀,平均硬度为660HV; 沉积层具有优异的耐磨性,其磨损性能提高了2.7倍;沉积层的磨损主要是黏着磨损、疲劳磨损、氧化磨损和磨粒磨损的综合作用,细小的弥散分布的硬质相是沉积层硬度以及耐磨性提高的主要因素.
参考文献
[1] | Chen Z;Zhou Y .Surface modification of resistance welding electrode by electro-spark deposited composite coatings: Part I. Coating characterization[J].Surface & Coatings Technology,2006(3/4):1503-1510. |
[2] | A. Lesnjak;J. Tusek .Processes and properties of deposits in electrospark deposition[J].Science and Technology of Welding and Joining,2002(6):391-396. |
[3] | P.Z.Wang .Accelerated Electrospark Deposition and the Wear Behavior of Coatings[J].Journal of Materials Engineering and Performance,1997(6):780-784. |
[4] | Agarwal A.;Dahotre NB. .Pulse electrode deposition of superhard boride coatings on ferrous alloy[J].Surface & Coatings Technology,1998(2/3):242-250. |
[5] | GALINOV IV .Investigation of the composition of Ag,Ni and AgNi pseudo-alloy coatings applied by electrospark alloying on a Cu substrate[J].Surface and Coatings Technology,1993,56(02):131-135. |
[6] | Ribalko AV.;Sahin O. .The use of bipolar current pulses in electrospark alloying of metal surfaces[J].Surface & Coatings Technology,2003(2/3):129-135. |
[7] | Parkansky N.;Rapoport L.;Boxman RL.;Goldsmith S.;Rosenberg Y.;Beilis II. .Electrode erosion and coating properties in pulsed air arc deposition of WC-based hard alloys[J].Surface & Coatings Technology,1998(1/2):130-134. |
[8] | 汪瑞军 .钛合金表面电火花沉积WC-Co强化层及其性能[D].哈尔滨工业大学,2005. |
[9] | 王建升,王华昆,钟毅,李勇,张玉新.电火花沉积技术及其应用[J].机械工人(冷加工),2004(01):34-36. |
[10] | 乔生儒,韩栋,李玫.钢铁表面电火花淬火组织超细化及机理[J].机械工程材料,2004(08):7-9. |
[11] | 王新林,石世宏,郑启光.激光熔覆层凝固特征与凝固组织控制研究[J].应用激光,2001(03):164-166. |
[12] | 张文钺.焊接冶金学[M].北京:机械工业出版社,1995 |
[13] | Staia MH.;Cruz M.;Carrasquero E.;Campillo B.;Perez R. Constantino M.;Sudarshan TS.;Fragiel A. .Characterization and wear behavior of pulsed electrode surfacing coatings[J].Wear: an International Journal on the Science and Technology of Friction, Lubrication and Wear,2001(2):1051-1060. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%