采用纳米压痕法,研究了经高温热循环处理后的等离子喷涂热障涂层材料弹性模量和硬度的抛物线式演变规律,并采用 Weibull统计分析方法对纳米压痕测试数据进行了处理和分析,提高了实验数据的可靠性.结果表明,经过高温热循环处理之后,不同位置处的热障涂层弹性模量和硬度都呈现出明显的各向异性分布.随着热循环次数的增加,涂层表面和截面上的弹性模量和疆度都随之增大,当达到一定次数之后,两者的数值变化趋于平缓.涂层截面处的弹性模量和硬度都大于涂层表面处的数值.最后结合热循环处理前后热障涂层材料微观结构的变化观察,简单讨论了其弹性模量和硬度演变的原因.
参考文献
| [1] | MILLER R A .Thermal barrier coatings for aircraft engines:history and directions[J].Journal of Thermal Spray Technology,1997,6(01):35-42. |
| [2] | 邛世均.高性能陶瓷涂层[M].北京:化学工业出版社,2004 |
| [3] | 李健保;周益春.新材料科学及其实用技术[M].北京:清华大学出版社,2002 |
| [4] | Padture NP;Gell M;Jordan EH .Materials science - Thermal barrier coatings for gas-turbine engine apptications [Review][J].Science,2002(5566):280-284. |
| [5] | A. G. Evans;M. Y. He;J. W. Hutchinson .Mechanics-based scaling laws for the durability of thermal barrier coatings[J].Progress in materials science,2001(3-4):249-271. |
| [6] | M.Y. He;J.W. Hutchinson;A.G. Evans .Large deformation simulations of cyclic displacement instabilities in thermal barrier systems[J].Acta materialia,2002(5):1063-1073. |
| [7] | W.G. Mao;Y.C. Zhou;L. Yang;X.H. Yu .Modeling of residual stresses variation with thermal cycling in thermal barrier coatings[J].Mechanics of materials,2006(12):1118-1127. |
| [8] | A. G. Evans;D. R. Mumm;J. W. Hutchinson;G. H. Meier;F. S. Pettit .Mechanisms controlling the durability of thermal barrier coatings[J].Progress in materials science,2001(5):505-553. |
| [9] | Shuqi Guo;Yutaka Kagawa .Effect of thermal exposure on hardness and Young's modulus of EB-PVD yttria-partially-stabilized zirconia thermal barrier coatings[J].CERAMICS INTERNATIONAL,2006(3):263-270. |
| [10] | Shuqi Guo;Yutaka Kagawa .Young's moduli of zirconia top-coat and thermally grown oxide in a plasma-sprayed thermal barrier coating system[J].Scripta materialia,2004(11):1401-1406. |
| [11] | Tang F;Schoenung JM .Evolution of Young's modulus of air plasma sprayed yttria-stabilized zirconia in thermally cycled thermal barrier coatings[J].Scripta materialia,2006(9):1587-1592. |
| [12] | 李美姮,胡望宇,孙晓峰,管恒荣,胡壮麒.EB-PVD热障涂层的弹性模量和断裂韧性研究[J].稀有金属材料与工程,2006(04):577-580. |
| [13] | 许宝星,李立州,赵彬,岳珠峰.平头压痕试验确定热障涂层弹性模量的方法研究[J].应用力学学报,2006(01):72-75. |
| [14] | 高怡斐.仪器化压痕试验法测定金属材料的硬度与材料参数[J].物理测试,2003(05):1-3,10. |
| [15] | Guo SQ;Kagawa Y .Effect of loading rate and holding time on hardness and Young's modulus of EB-PVD thermal barrier coating[J].Surface & Coatings Technology,2004(1):92-100. |
| [16] | WEIBULL W .A statistical distribution function of wide applicability[J].Journal of Applied Mechanics,Transactions of the ASME,1951,18:293-297. |
| [17] | LI H;BRADT R C .The indentation load/size effect and the measurement of the hardness of vitreous silica[J].Journal of Non-Crystalline Solids,1992,146:197-212. |
| [18] | Zhou YC.;Hashida T. .Coupled effects of temperature gradient and oxidation on thermal stress in thermal barrier coating system[J].International Journal of Solids and Structures,2001(24/25):4235-4264. |
| [19] | ARTIGAS R;PINTO A;LAGUARTA A .Three-dimensional micro-measurement on smooth and rough surfaces with a new confocal optical profiler[J].Proceedings the SPIE-The International Society for Optical Engineering,1999,3824:93-104. |
| [20] | 李剑锋,周霞明,丁传贤.等离子喷涂Cr3C2-NiCr涂层的气孔率统计分析[J].航空材料学报,2000(01):33-39. |
| [21] | J. A. THOMPSON;T. W. CLYNE .THE EFFECT OF HEAT TREATMENT ON THE STIFFNESS OF ZIRCONIA TOP COATS IN PLASMA-SPRAYED TBCs[J].Acta materialia,2001(9):1565-1575. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%