欢迎登录材料期刊网

材料期刊网

高级检索

采用海水浸泡-阳光曝晒循环老化的方法,模拟实际海洋环境载荷对T300/环氧复合材料的作用,用以评价手糊成型T300/环氧复合材料在海洋环境中的耐久性.通过对老化前后复合材料的质量变化、轴向抗拉强度、拉伸模量、面内剪切强度及压缩强度等基本力学性能的分析,研究T300/环氧复合材料的老化规律.结果表明:经过湖北武汉和海南三亚140天的自然循环老化,增重率随时间的增加而增加,力学性能的衰减趋势基本一致,其中拉伸模量老化特征不明显,抗拉强度变化较小,然而面内剪切强度和轴向压缩强度衰减幅度较大,干态试件剩余强度大于湿态试件剩余强度.

参考文献

[1] Le Duigou, A;Davies, P;Baley, C .Seawater ageing of flax/poly(lactic acid) biocomposites[J].Polymer Degradation and Stability,2009(7):1151-1162.
[2] BRANCA F O;GUILLERMO J C .An analytical-numerical framework for the study of ageing in fiber reinforced polymer composites[J].Computers and Structures,2004,65(03):443-457.
[3] 吕小军,张琦,马兆庆,许俊华,肖文萍.湿热老化对碳纤维/环氧树脂基复合材料力学性能影响研究[J].材料工程,2005(11):50-53,57.
[4] Ray BC .Temperature effect during humid ageing on interfaces of glass and carbon fibers reinforced epoxy composites[J].Journal of Colloid and Interface Science,2006(1):111-117.
[5] 刘建华,赵亮,李松梅,胡建平,宫兆合.盐雾环境对玻璃纤维增强树脂基复合材料力学性能的影响[J].复合材料学报,2007(03):18-22.
[6] Dionysis E. Mouzakis;Helen Zoga;Costas Galiotis .Accelerated environmental ageing study of polyester/glass fiber reinforced composites (GFRPCs)[J].Composites, Part B. Engineering,2008(3):467-475.
[7] V. Bellenger;J. Decelle;N. Huet .Ageing of a carbon epoxy composite for aeronautic applications[J].Composites, Part B. Engineering,2005(3):189-194.
[8] C.Wang;Y.D.Huang;H.Y.Xv;W.B.Liu .The durability of adhesive/carbon-carbon composites joints in salt water[J].International Journal of Adhesion & Adhesives,2004(6):471-477.
[9] A. Kootsookos;A.P. Mouritz .Seawater durability of glass- and carbon-polymer composites[J].Composites science and technology,2004(10/11):1503-1511.
[10] Romain Maurin;Yves Perrot;Alain Bourmaud .Seawater ageing of low styrene emission resins for marine composites: Mechanical behaviour and nano-indentation studies[J].Composites, Part A. Applied science and manufacturing,2009(8):1024-1032.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%