研究了再次喷丸对于经过预先喷丸的TC18钛合金残余应力和室温疲劳寿命的影响.使用X射线衍射仪和旋转弯曲疲劳机测定了再次喷丸后的合金的表面残余应力以及总疲劳寿命.结果表明,疲劳试验会使预先喷丸的TC18钛合金疲劳试样表面残余压应力松弛30％～50％,而再次喷丸可以使由于疲劳而松弛的表面残余压应力回复到疲劳试验前试样的50％～70％.此外,相比未经过再次喷丸的试样,选择合适的再次喷丸周期可使TC18钛合金的总疲劳服役寿命提高了75％.
参考文献
| [1] | POLKIN S;RODIONOV V L;STROSHKOV A N.Structure and mechanical properties of VT22(α+ β)high strength titanium alloy semiproducts[A].San Diego:TMS,1992:1569-1572. |
| [2] | 王金友;葛志明;周彦邦.航空用钛合金[M].上海:上海科学技术出版社,1985 |
| [3] | 曹春晓.钛合金在大型运输机上的应用[J].稀有金属快报,2006(01):17-21. |
| [4] | 沙爱学,李兴无,王庆如,鲍如强.热变形温度对TC18钛合金显微组织和力学性能的影响[J].中国有色金属学报,2005(08):1167-1172. |
| [5] | BOYER P R.Application of beta titanium alloys in airframes[J].Beta Titanium Alloys in the 1990's-Titanium Committee of TMS,2003:333-345. |
| [6] | J. Lindemann;C. Buque;F. Appel .Effect of shot peening on fatigue performance of a lamellar titanium aluminide alloy[J].Acta materialia,2006(4):1155-1164. |
| [7] | Y. K. Gao .Influence of shot peening on fatigue property of Ti-60 high temperature titanium alloy[J].Surface Engineering,2007(6):431-433. |
| [8] | 高玉魁.TC18超高强度钛合金喷丸残余压应力场的研究[J].稀有金属材料与工程,2004(11):1209-1212. |
| [9] | 高玉魁.喷丸对TC18钛合金拉-拉疲劳性能的影响[J].稀有金属材料与工程,2004(09):1000-1002. |
| [10] | 杨首新,彭月友.喷丸技术在发动机修理中的应用[J].航空维修与工程,2000(5):29-31. |
| [11] | Lee H;Mall S;Sathish S .Investigation into effects of re-shot-peening on fretting fatigue behavior of Ti-6Al-4V[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):227-232. |
| [12] | X. P. Jiang;C. -S. Man;M. J. Shepard;T. Zhai .Effects of shot-peening and re-shot-peening on four-point bend fatigue behavior of Ti-6Al-4V[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2007(0):137-143. |
| [13] | 王强,王欣,高玉魁,宋颖刚.孔强化对TC18钛合金疲劳寿命的影响[J].材料工程,2011(02):84-86. |
| [14] | MUTOH Y;FAIR G H;NUBLE B et al.The effect of residual stresses induced by shot peening on fatigue crack propagation in two high strengthen aluminum alloys[J].Fatigue and Fracture Engineering Materials and Structure,1987,10(04):261-272. |
| [15] | 陈勃,高玉魁,吴学仁,马少俊.喷丸强化7475-T7351铝合金的小裂纹行为和寿命预测[J].航空学报,2010(03):519-525. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%