欢迎登录材料期刊网

材料期刊网

高级检索

采用Gleeble-1500D热模拟试验机对AISI403马氏体不锈钢进行高温热压缩实验,结合金相组织观察,对其流变应力进行了研究.结果表明:403钢在950~1150℃,应变速率为0.01~0.1s-1的条件下,发生了较明显的动态再结晶;利用Zener-Hollomon参数的双曲对数函数能较好地描述403钢的流变行为;经回归得到了403钢峰值应力σp的表达式和热变形激活能Q值;通过热加工图的建立获得最佳热变形条件及预测流变失稳区.

参考文献

[1] 李宏明;马巧红.核电及核电用钢的发展[J].世界钢铁,2007(02):70-72.
[2] 赵宪明,吴迪,陈学军.60Si2Mn钢动态再结晶数学模型的实验研究[J].钢铁研究学报,2003(05):32-34.
[3] 程晓茹;李虎兴 .管线钢X65高温变形动态再结晶研究[J].金属学报,1997,33(12):1275-1281.
[4] 刘宁,王立民,陈礼清,刘相华,刘正东,杨钢,朱心昆.403Nb钢高温热压缩变形条件下的流变应力研究[J].塑性工程学报,2008(03):114-118.
[5] SALEHI A R;TAHERI A K .Flow behavior and microstructural evolution of 53Fe-26Ni-15Cr superalloy during hot compression test[J].Ironmaking and Steelmaking,2007,34(02):151-156.
[6] Stewart GR;Elwazri AM;Yue S;Jonas JJ .Modelling of dynamic recrystallisation kinetics in austenitic stainless and hypereutectoid steels[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2006(5):519-524.
[7] A. Dehghan-Manshadi;M. R. Barnett;P. D. Hodgson .Microstructural evolution during hot deformation of duplex stainless steel[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2007(12):1478-1484.
[8] PRASAD Y V R K;GEGEL H L;DORAIVELU S M .Modeling of dynamic material behavior in hot deformation:forging of Ti6242[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1984,15(10):1883-1892.
[9] Y.V.R.K. Prasad;K.P. Rao .Processing maps for hot deformation of rolled AZ31 magnesium alloy plate: Anisotropy of hot workability[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):316-327.
[10] SRINIVASAN N;PRASAD Y V R K .Microstructural control in hot working of IN-718 superalloy using processing map[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1994,25(10):2275-2284.
[11] 韩德伟;张建新.金相试样制备与显示技术[M].长沙:中南大学出版社,2005:156-158.
[12] ZENER C;HOLLOMON J H .Effect of strain rate upon the plastic flow of steel[J].Journal of Applied Physics,1944,15(01):22-32.
[13] SELLARS C M;TEGART W J M .On the mechanism of hot deformation[J].Acta Metallurgica,1966,14(09):1136-1138.
[14] 中国科学院数学研究所统计组.常用数理统计方法[M].北京:科学出版社,1974:92-100.
[15] 胡赓祥;蔡珣;戎咏华.材料科学基础[M].上海:上海交通大学出版社,2000:210-213.
[16] SRINIVASAN N;PRASAD Y V R K .Hot working characteristics of nimonic75,80A and 90 superalloys:a comparison using processing maps[J].Journal of Materials Processing Technology,1995,51(01):171-192.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%