采用扫描电子显微镜、能谱分析仪和金相显微镜对空气压缩机叶片的宏微观形貌、断口表面成分、金相组织及硬度进行了观察和分析.结果表明:断裂叶片的硬度低于其他叶片,导致其抗高周疲劳性能下降,在近表面夹杂物处萌生疲劳裂纹,最终发生断裂.
参考文献
[1] | Bok-Won Lee;Jungjun Suh;Hongchul Lee .Investigations on fretting fatigue in aircraft engine compressor blade[J].Engineering failure analysis,2011(7):1900-1908. |
[2] | G.H. Farrahi;M. Tirehdast;E. Masoumi Khalil Abad .Failure analysis of a gas turbine compressor[J].Engineering failure analysis,2011(1):474-484. |
[3] | 马小明,胡林星.高速离心式压缩机叶片断裂失效分析[J].理化检验:物理分册,2011(08):527-530,533. |
[4] | 支金花,张海存,卢正欣,周亚锋,刘明霞.轴流压缩机叶片断裂分析[J].流体机械,2011(02):47-51. |
[5] | Lucjan Witek .Crack propagation analysis of mechanically damaged compressor blades subjected to high cycle fatigue[J].Engineering failure analysis,2011(4):1223-1232. |
[6] | TROSHCHENKO V T;PROKOPENKO A V.Fatigue strength of gas turbine compressor blades[J].Engineering Failure Analysis,2000(07):209-220. |
[7] | Zhong N.S.;Huang H.Q. .Failure investigation of blade and disk in first stage compressor[J].Engineering failure analysis,2000(6):385-392. |
[8] | S. Sivaprasad;N. Narasaiah;S.K. Das .Investigation on the failure of air compressor[J].Engineering failure analysis,2010(1):150-157. |
[9] | V. Infante;J.M. Silva;M. de Freitas .Failures analysis of compressor blades of aeroengines due to service[J].Engineering failure analysis,2009(4):1118-1125. |
[10] | 钟群鹏;赵子华.断口学[M].北京:高等教育出版社,2006 |
[11] | C. Berger;B. Kaiser .Results of very high cycle fatigue tests on helical compression springs[J].International Journal of Fatigue,2006(11):1658-1663. |
[12] | Chapetti MD.;Tagawa T.;Miyata T. .Ultra-long cycle fatigue of high-strength carbon steels part I: review and analysis of the mechanism of failure[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):227-235. |
[13] | Kuei-Chang Hsu;Chih-Kuang Lin .Effects of R-ratio on high-temperature fatigue crack growth behavior of a precipitation-hardening stainless steel[J].International Journal of Fatigue,2008(12):2147-2155. |
[14] | Furuya, Y. .Notable size effects on very high cycle fatigue properties of high-strength steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2011(15):5234-5240. |
[15] | Q.Y. Wang;C. Bathias;N. Kawagoishi .Effect of inclusion on subsurface crack initiation and gigacycle fatigue strength[J].International Journal of Fatigue,2002(12):1269-1274. |
[16] | CHAPETTI M D;TAGAWA T;MIYATA T .Ultra-long cycle fatigue of high-strength carbon steels part Ⅱ:estimation of fatigue limit for failure from internal inclusions[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2003,356(1-2):236-244. |
[17] | CHAPETTI M D .Prediction of threshold for very high cycle fatigue (N》107cydes)[J].Procedia Engineering,2010,2(01):257-264. |
[18] | J.M. Zhang;S.X. Li;Z.G. Yang .Influence of inclusion size on fatigue behavior of high strength steels in the gigacycle fatigue regime[J].International Journal of Fatigue,2007(4):765-771. |
[19] | Taizo Makino .The effect of inclusion geometry according to forging ratio and metal flow direction on very high-cycle fatigue properties of steel bars[J].International Journal of Fatigue,2008(8):1409-1418. |
[20] | 刘昆鹏,有移亮,张珊,张峥.50CrVA扭杆断裂原因分析[J].材料工程,2010(08):5-7,11. |
[21] | 邓忠,孔凡亚.1Cr18Ni10Ti不锈钢疲劳性能研究[J].飞机设计,2002(02):66-72. |
[22] | Lucjan Witek .Crack propagation analysis of mechanically damaged compressor blades subjected to high cycle fatigue[J].Engineering failure analysis,2011(4):1223-1232. |
[23] | Zhang, DY;Hong, J;Ma, YH;Chen, LL .A probability method for prediction on High Cycle Fatigue of blades caused by aerodynamic loads[J].Advances in engineering software,2011(12):1059-1073. |
[24] | OZBAYSAL K;INAL O T .Age-hardening kinetics and microstructure of PH15-5 stainless steel after laser melting and solution treating[J].Journal of Materials Science,1994,29(06):1471-1480. |
[25] | MIRZADEH H;NAJAFIZADEH A .Aging kinetics of 17-4 PH stainless steel[J].Materials Chemistry and Physics,2009,116(01):119-124. |
[26] | HABIBI BAJGUIRANI H R;SERVANT C;CIZERON G .TEM investigation of precipitation phenomena occurring in PH 15-5 alloy[J].Acta Metallurgica Et Materialia,1993,41(05):1613-1623. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%