欢迎登录材料期刊网

材料期刊网

高级检索

用脉冲磁控溅射法在柔性衬底聚对苯二甲酸乙二醇酯(PET)上制备了氧化铟锡(ITO)透明导电薄膜,研究了溅射气压、时间和衬底温度等工艺条件对ITO薄膜光电性能的影响,并采用X射线衍射仪(XRD)、扫描电镜(SEM)对薄膜的物相结构与表面形貌进行了分析.结果表明:薄膜的平均晶粒尺寸随衬底温度的升高而增大;当溅射时间增加时,方块电阻与光透过率均减小;当衬底温度升高时,方块电阻减小,可见光透过率增大.

参考文献

[1] 王树林,夏冬林.ITO薄膜的制备工艺及进展[J].玻璃与搪瓷,2004(05):51-54.
[2] Lin, YC;Li, JY;Yen, WT .Low temperature ITO thin film deposition on PES substrate using pulse magnetron sputtering[J].Applied Surface Science,2008(11):3262-3268.
[3] A. El Hichou;A. Kachouane;J.L. Bubendorff;M. Addou;J. Ebothe;M. Troyon;A. Bougrine .Effect of substrate temperature on electrical, structural, optical and cathodoluminescent properties of In_2O_3-Sn thin films prepared by spray pyrolysis[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2004(1/2):263-268.
[4] GEORGE J;MENON C S .Electrical and optical properties of electron beam evaporated ITO thin films[J].Surface and Coatings Technology,2000,132(01):45-48.
[5] Alam MJ.;Cameron DC. .Optical and electrical properties of transparent conductive ITO thin films deposited by sol-gel process[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2000(0):455-459.
[6] H. Kim;J. S. Horwitz;G. P. Kushto;Z. H. Kafafi;D. B. Chrisey .Indium tin oxide thin films grown on flexible plastic substrates by pulsed-laser deposition for organic light-emitting diodes[J].Applied physics letters,2001(3):284-286.
[7] Kim YS.;Park YC.;Ansari SG.;Lee JY.;Lee BS.;Shin HS. .Influence of O-2 admixture and sputtering pressure on the properties of ITO thin films deposited on PET substrate using RF reactive magnetron sputtering[J].Surface & Coatings Technology,2003(2/3):299-308.
[8] 赵佳明,边继明,孙景昌,张东,梁红伟,骆英民.柔性聚酰亚胺(PI)衬底上ITO薄膜的生长及其透明导电性能影响机制研究[J].功能材料,2011(z4):644-647.
[9] Y.C. Lin;W.Q. Shi;Z.Z. Chen .Effect of deflection on the mechanical and optoelectronic properties of indium tin oxide films deposited on polyethylene terephthalate substrates by pulse magnetron sputtering[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,2009(5):1701-1705.
[10] 肖定全;朱建国;朱基亮.薄膜物理与器件[M].北京:国防工业出版社,2010
[11] 辛荣生,林钰,贾晓林.工艺条件对柔性衬底ITO薄膜光电性能的影响[J].电子元件与材料,2009(06):43-45.
[12] 王军,成建波,饶海波,蒋亚东,杨刚.磁控溅射低阻ITO薄膜的气体参数优化[J].压电与声光,2007(01):115-117.
[13] 余焜.材料结构分析基础[M].北京:科学出版社,2010
[14] 袁红梅,林祖伦,陈文彬,韦新颖.溶胶-凝胶法制备ITO薄膜及其光电性能的研究[J].电子器件,2010(01):5-9.
[15] 罗飞,王锦鹏,陶春虎,李志,刘大博.化学液相沉积制备PbSe薄膜生长过程及其性能研究[J].航空材料学报,2011(02):33-36.
[16] 祁洪飞,刘大博.薄膜生长工艺对TiO2基紫外探测器光电性能的影响[J].航空材料学报,2011(05):47-50.
[17] 梁继然,胡明,阚强,陈涛,梁秀琴,陈弘达.晶粒尺寸对氧化钒薄膜电学与光学相变特性的影响[J].材料工程,2011(04):58-62,74.
[18] 卢进军;刘卫国.光学薄膜技术[M].西安:西北工业大学出版社,2005
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%