在自制气动式间接杆杆型冲击拉伸试验机上对含1.6Si-1.58Mn-0.195C的TRIP(Transformation-induced Plasticity)钢在不同应变率下的高速冲击拉伸性能进行了研究,并和静态拉伸性能进行了比较.结果显示,随应变速率的提高,材料的抗拉强度显著增加,延伸率降低.由于TRIP钢组织中残余奥氏体在应力应变作用下向马氏体的相变诱发转变显著改善了材料的塑性,因此在高应变率下的延伸率仍较好.
参考文献
| [1] | Harry C·Rogers.Adiabatic plastic deformation[A].Annual Reviews inc.,Palo Alto,California,USA,1979:283-311. |
| [2] | L.E.Malverm.Experimental and theoretical approaches to eharaeterization of material behavior at high rates of deformation[A].Conference series No:70,The institute of physics Bristol and London,1984:l-20. |
| [3] | Hai QlU .Effect of Strain Rate and Plastic Pre-strain on the Ductility of Structural Steels[J].ISIJ International,1999(9):955-960. |
| [4] | N Kojima;N.Mizui;K.Fukui;Y Kawaguchi and M Tsukamoto .High speed tensile test of sheet steels for automotive use and axial collapse test of columns[J].Sumitomo Metals,1996,50(03):31-40. |
| [5] | Shusaku Takagi .High strain rate deformation of high strength steels[J].材料とプロセス,1996(6):1108-1111. |
| [6] | H Furuya;R. Uemori;S. Aihara et al.Ductile Crack propagation characteristics and mechanism of structural steel under ligh strain rate[J].Tetsu-to-Hagnane,2000,86:409-416. |
| [7] | H Qiu;H. Moil;M. Enoki;N Takeda,T Kishi .Development of a three dimensional model for ductile fracture in material containing two types of microvoids[J].ISIJ International,1999,39(04):352-357. |
| [8] | O Matsumura;Y Sakuma;H Takeehi .Enhancement of elongation by retained austanite in intereritieal annealed 0.4C-1.5Si 0.8Mn steel[J].Transactions of the Iron and Steel Institute of Japan,1987,27:570-579. |
| [9] | A Pichler;P.Stirszny .TRIP steel with reduced silicon eontent[J].Steel Research International,1999,70(11):459. |
| [10] | P.Jacques .Enhancement of the Mechanical Properties of a Low-Carbon, Low-Silicon Steel by Formation of a Multiphased Microstructure Containing Retained Austenite[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1998(9):2383-2394. |
| [11] | Y Sakuma;D. K. Matlock;G. Krauss .Intercritical annealed and isothermally transformed 0. 15pet C steels containing 1.2 pet Si-1.5 pet Mn and 4 pet Ni: Part Ⅱ.Effect of testing temperature on stress-strain behavior and deformation-induced austenite transformation[J].Metallurgical and Materials Transactions,1992,23:1233-1241. |
| [12] | I Tsukatani;S. Hashimoto;T. Inoue .Effects of silicon and manganese addition on mechanieal properties of high-strength bot-rolled sheet steel containing retained austenite[J].ISIJ International,1991,31(09):992-I000. |
| [13] | K Sugitomo;A. Nagasaka;M. Kohayashi;S I Hashimoto .Effects of retained anstenite parameters on warm stretch-flangeability in TRIP-aided dual-phase sheet steels[J].ISIJ International,1999,39(01):56-63. |
| [14] | T. MINOTE;S. TORIZUKA;A. OGAWA;M. NIIKURA .Modeling of Transformation Behavior and Compositional Partitioning in TRIP Steel[J].ISIJ International,1996(2):201-207. |
| [15] | E Girault;P. Jacques;Ph. harlet et al.Metallographic methods for revealing the multiphase mierostmcture of TRIP assisted steels[J].Materials Characterization,1998,40:111-118A. |
| [16] | 王从约 .杆-杆型冲击拉伸试验系统的动力学数值分析--试验原理的验证和试件尺寸的匹配[D].中国科学技术大学,1996. |
| [17] | YUANXIN ZHOU;YUANMING XIA .Tensile mechanical behavior of TiAl(FL) at high strain rate[J].Journal of Materials Science,2000(4):925-929. |
| [18] | 王礼立;余同希;李永池.冲击动力学进展[M].合肥:中国科学技术大学出版社,1992 |
| [19] | 龚明;束德林;牛晓鸣 .20Cr双相钢冲击拉伸特性研究[J].机械工程材料,1996,20(06):23-26. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%