以H13热作模具钢和高强度钢为例,分别重点讨论钢的组织控制和设计.对H13钢,应消除原生碳化物和偏析,改善二次碳化物分布,使成分均匀化,缩小钢块纵、横向性能差,可将现国产H13钢的使用寿命显著提高.对兼具高强度(Rm>2000MPa)和韧性钢的组织,拟设计为:低温回火马氏体组织,含高密度位错的细条马氏体,包有残余奥氏体薄膜,并分布弥散的碳化物(避免渗碳体的形成);钢含低的碳量,并含有一定量的Si、Al和Mn、Ni、Mo等合金元素及Nb等碳化物形成元素;适当应用Q-P处理、双相区退火、贝氏体或马氏体等温处理等.文章分两期发表.
参考文献
[1] | G Krauss .Heat treated martensitic steels:microstructural systems for advanced manufacture[J].ISIJ International,1995,35:349. |
[2] | M A Zaccone;G Krauss .Elastic limits and microplastic response in ultrahigh strength carbon steels[J].METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,1989,20A:188. |
[3] | M Hayakawa;T Hara;S Matsuoka;K.Tsuzaki .Microstructural observation of tempered martensite in medium-carbon low-alloy steel by atomic force microscopy[J].Journal of the Japan Institute of Metals,2000,64:460. |
[4] | T Ando;G Krauss .The effect of phosphorus content on grain boundary cementite formation in AISI 52100 steel[J].METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,1981,12A:1283. |
[5] | M Saeglitz;G Krauss .Deformation,fracture and mechanical properties of low-temperature-tempered martensite in SAE 43xx steels[J].Metall Maters Trans A,1997,28A:377. |
[6] | S Floreen .THE PHYSICAL METALLURGY OF MARAGING STEELS[J].Met Rev,1968,13:115. |
[7] | V K Chandhok;J P Hirsh;E J Dulis .Effect of cobalt on carbon activity and diffusivity in steels[J].Trans AIME,1962,224:858. |
[8] | V K Chandhok;J P Hirsh;E J Dulis .Effect of cobalt on tempering tool and alloy steels[J].Trans ASM,1963,56:677. |
[9] | G R Speich;D S Dabkowski;L F Porter.Strength and toughness of Fe-10Ni alloys containing C,Cr,Mo,and Co[J].METALLURGICAL TRANSACTIONS,1973(04):303. |
[10] | P M Machmeier;C D Little;M H Horowitz;R.P.Oates.Development of a strong martensitic steel having good fracture toughness[J].METALS AND TECHNOLOGY,1979:291. |
[11] | C D Little;P M Machmeier .[P].US 4076525,1978. |
[12] | RAGHAVAN AYER;P.M. MACHMEIER .Microstructural Basis for the Effect of Chromium on the Strength and Toughness of AF1410-Based High Performance Steels[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1996(9):2510-2517. |
[13] | M Schmidt;R Hemphill.Innovations in Ultrahigh Strength Steel Technology[A].U S Army Materials Technology Laboratory Watertown MA,1990:239-260. |
[14] | Raghavan Ayer;P M Machmeier .Transmission electron microscopy examination of hardening and toughening phenomena in Aermet 100[J].METALLURGICAL TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE,1993,24A:1943. |
[15] | Raghavan Ayer;P M Machmeier .On the characteristics of M2C carbides in the peak hardening regime of AerMet100 steel[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1998,29A:903. |
[16] | M. De MEYER .The Influence of the Substitution of Si by Al on the Properties ofCold Rolled C-Mn-Si TRIP Steels[J].ISIJ International,1999(8):813-822. |
[17] | Lin LI,P.Wollants,Zuyao XU,B.C.De Cooman,Xiaodong ZHU.Effects of Alloying Elements on the Concentration Profile of Equilibrium Phases in Transformation Induced Plasticity Steel[J].材料科学技术学报(英文版),2003(03):273-277. |
[18] | LI Lin;ZHANG Mei;HE Yan-lin .Computer-Aided Design of Some Advanced Steels and Cemented Carbides[J].Journal of iron and steel research,2005(6):42-48. |
[19] | S J Kim;C G Lee;T H Lee;C.S.Oh .Effect of Cu,Cr and Ni on mechanical properties of 0.15 wt.% C TRIP-aided cold rolled steels[J].Scripta Materialia,2003,48:539. |
[20] | S Hashimoto;S Ikeda;K I Sugimota;S.Miyake .Effects of Nb and Mo addition to 0.2%C-1.5%Si-1.5%Mn steel on mechanical properties of hot rolled TRIP-aided steel sheets[J].ISIJ International,2004,44:1590. |
[21] | S Scott;P Maugis;P Barges;M.Goune.Microalloying with vanadium in TRIP steels[A].,2004:181. |
[22] | 戎咏华;王晓东.高强度钢的组织设计与控制[A].,2006 |
[23] | S. Vercammen;B. Blanpain;B. C. De Cooman .Cold rolling behaviour of an austenitic Fe-30Mn-3Al-3Si TWIP-steel: the importance of deformation twinning[J].Acta materialia,2004(7):2005-2012. |
[24] | O Gr ssel;L Krüger;G Frommeyer;L.W.Meyer .High strength Fe-Mn-(Al,Si) TRIP/TWIP steels development-properties-application[J].International Journal of Plasticity,2000,16:1391. |
[25] | G Frommeyer;U Brüx;P Neumann .Super-ductile and high strength Manganese-TRIP/TWIP steels for high energy absorption purposes[J].ISIJ International,2003,43:438. |
[26] | B X Huang;X D Wang;Y H Rong;L.Wang,L.Jin.Mechanical behavior and martensitic transformation in an Fe-Mn-Si-Al-Nb alloy[J].Materials Science and Engineering A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2006 |
[27] | D V Edmonds;K He;F C Rizzo;A.Clark,D.K.Matlock,J.G.Speer.Microstructures of a new martensitic steel heat treatment:quenching and partitioning[M]. |
[28] | 范长刚,董瀚,时捷,刘燕林,雍岐龙,惠卫军,王毛球,翁宇庆.2200 MPa级超高强度低合金钢的组织和力学性能[J].兵器材料科学与工程,2006(02):31-35. |
[29] | 徐祖耀.贝氏体相变简介[J].热处理,2006(02):1-20. |
[30] | F. G. Caballero;H. K. D. H. Bhadeshia;K. J. A. Mawella .Very strong low temperature bainite[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2002(3):279-284. |
[31] | F G Caballero;H K D H Bhadeshia .Very strong bainite[J].Current Opinion in Solid State & Mater Sci,2004,8:251. |
[32] | H. K. D. H. Bhadeshia .52nd Hatfield Memorial Lecture Large chunks of very strong steel[J].Materials Science and Technology: MST: A publication of the Institute of Metals,2005(11):1293-1302. |
[33] | H K D H Bhadeshia.Bainitic bulk nanocrystalline steel[A].Gyeongju Korea,2006:33. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%