对超低碳烘烤硬化钢在740℃到800℃之间进行退火,通过拉伸试验获得试样的力学性能.利用有限元软件ANSYS/LS-DYNA对试样的拉伸过程进行模拟并验证模拟过程的可行性,同时也解释了拉伸过程中出现的非正常断裂现象.对拉伸过程正常断裂试样的模拟及试验结果计算获得合适的模拟参数.模拟结果显示,拉伸过程中非正常断裂的退火试样应在中间位置断裂,其延伸率相比其他试样并没有很大的突变.认为有限元模拟可以对超低碳烘烤硬化钢的拉伸行为的预测起到一定指导作用.
参考文献
| [1] | Taylor K A;Speer J G.Development of vanadium-alloyed,bakehardenable sheet steels for hot-dip coated applications[A].PROC,ISS,Indianapolis,IN,USA,1997:49-61. |
| [2] | Ooi S W;Fourlaris G.A comparative study of precipitationeffects in Ti only and Ti-V Ultra Low Carbon(ULC) strip steels[J].Materials Characterization,2006:56,214-226. |
| [3] | Mitchell P;Gladman T.Vanadium in interstitial free steels[A].PROC,ISS,USA,1997:37-48. |
| [4] | Eduardo E. Cabezas;Diego J. Celentano .Experimental and numerical analysis of the tensile test using sheet specimens[J].Finite elements in analysis & design,2004(5/6):555-575. |
| [5] | Zhao Y H;Guo Y Z;Wei Q et al.Influence of specimen dimensions and strain measurement methods on tensile stress-straincurves[J].Materials Science and Engineering A:Structural Materials Properties Microstructure and Processing,2009,525:68-67. |
| [6] | Zhao Y H;Guo Y Z;Wei Q.Influence of specimen dimensions on the tensile behavior of ultrafine-grained Cu[J].Scripta Materialia,2008:59,627-630. |
| [7] | Dumoulin S;Tabourot L;Chappuis C et al.Arrieux,Determination of the equivalent stress-equivalent strain relationship of acopper sample under tensile loading[J].Journal of Materials Processing Technology,2003,133:79-83. |
| [8] | Arriaga A;Pagaldai R;Zaldua A M et al.Impact testing andsimulation of a polypropylene component.Correlation with strainrate sensitive constitutive models in ANSYS and IS-DYNA[J].Polymer Testing,2010,29:170-180. |
| [9] | Belhabib S;Haddadi H;Gaspbrini M.Heterogeneous tensile test on elastoplastic metallic sheets;Comparison betweenFEM simulations and full-field strain measurements[J].International Journal of Mechanical Sciences,2008:50,14-21. |
| [10] | Kazutake Komori .Simulation of tensile test by node separation method[J].Journal of Materials Processing Technology,2002(0):608-612. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%