基于传输线理论提出了宽频带测量微波铁氧体铁磁共振线宽的短路微带线法.通过有效参数模型,分析放入样品前后短路微带线单端口网络反射系数S11的变化,进而得到铁磁共振线宽ΔHω=Δω/γ,其中Δω为磁导率虚部共振峰的半高宽.设计和制作了短路微带线夹具,并利用所设计的微带夹具测量了钇铁石榴石(YIG)材料的ΔHω.最后分析了退磁因子对共振频率的影响,并讨论了样品表面缺陷对ΔHω的影响.该方法不仅测量准确度高,操作简单,更解决了低频测量铁磁共振线宽的难点.
A broadband shorted microstrip line measurement method of ferromagnetic resonance (FMR) linewidth ΔHω for microwave ferrite is proposed based on transmission line theory.Different from conventional ΔH derived from field width, ΔHω is obtained by sweeping frequency.The effective parameter model is utilized to analyze the changes of the reflection coefficient S11 of microstrip line with and without a sample.By the method mentioned above, the ΔHω =Δω/γ is obtained, where Δω is the full-width at half-maximum (FWHM) for the peak in the imaginary part of complex permeability at resonance.Using the designed test fixture, ΔHω of yttrium iron garnet (YIG) material is reported.The effect of thedemagnetizing factors at the resonance frequency is investigated.Meanwhile, the impact of the sample surface imperfections on ΔHω is discussed.Compared to the conventional method, this method is easily operated with high accuracy and the disadvantages of linewidth measurement at low frequency are overcome.
参考文献
- 下载量()
- 访问量()
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%