研究了在0.2 mol/L NaCl以及0.01 mol/L HCL介质中AFM探针与铜镍合金表面之间的持续相互作用力对铜镍合金表面溶解行为的影响,结果表明,针尖的刮擦可以加速该合金表面的溶解;作为有机缓蚀剂加入溶液中的十二胺可以吸附于合金表面形成吸附膜,使针尖在界面作用时的能量分布发生改变,从而抑制了铜镍合金的加速溶解.
参考文献
[1] | Gewirth A A, Niece B K. Electrochemical applications of in suit scanning probe microscopy[J]. Chem. Rev, 1997, 97:1129. |
[2] | Li J, Lampner D. In-suit AFM study of pitting corrosion of Cu thin film[J]. Colloids and Surfaces, 1999,154:227. |
[3] | Chen L, Guay D. Selected dissolution of aluminum initiated by atomic force microscopy tip-surface interaction [ J ]. J. Electrochem. Soc, 1994, 141 :L43. |
[4] | Schmutz P, Frankel G S. Corrosion study of AA2024-T3 by scanning kelvin probe force microscopy and in-suit atomic microscopy scratching[J ]. J. Electrochem. Soc, 1998, 145:2292. |
[5] | Schmutz P, Frankel G S. Influence of dichromate ions on corrosion of pure aluminum and AA2024-T3 in NaCl solution studied by AFM scratching[J] .J. Electrochem. Soc, 1999, 146:4461. |
[6] | 姚思童,吴晓艺,孙雅茹.铜缓蚀剂的研究现状[J].沈阳工业大学学报,2000,22(2):173. |
[7] | Plaschke M, Romer J, Kim J I. Alignment of in suit AFM images using microstructured reference points [ J ]. Ultramicroscopy, 1998, 75:77 . |
[8] | 李杰,刘炎,宋诗哲.Cu-Ni合金在溶液中的孔蚀特征[J].电化学,2003,9(4):422. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%