GF/PET混纤纱复合材料成型工艺条件与材料性能关系的探讨

1.中国纺织大学纺织一系,200051

2.中国纺织大学纺织一系,200051

3.中国纺织大学纺织一系,200051

STUDY OF THE RELATIONSHIP BETWEEN MOULDING CONDITION AND PROPRETIES OF GF/PET COMINGLED YARN COMPOSITES

复合材料的成型参数可影响复合材料的空隙率,而空隙率又对复合材料的层间剪切强度(LISS)、弯曲强度等力学性能产生显著影响.本文针对这一点探讨了连续玻璃纤维增强涤纶混纤纱复合材料的成型工艺条件与复合材料的空隙率及力学性能的关系.

[1]	S R Giore.Effect of void content on the mechanical properties of Carbon/Epoxy laminates[J].SAMPE Quarterly,1993
[2]	Jang-Kyo Kin;Yiu-Wing Ming.Fracture toughness of Kevlar-Epoxy[J].Materials Science,1988(23)
[3]	Zenichiro Maekawa.Mechanical properties of comingled yarn composite[J].Materials Science,1990(18)
[4]	Kenneth J;Bowles et.Relationship between void and interlaminar shear strength of polymer matrix composites[C].SAMPE.Symp,1991

上一张下一张

计量

作者相关

文章评分