一般针对复合材料层合板铺层优化设计的研究多侧重于算法的研究,没有考虑到铺层知识对铺层的约束.本文建立了基于启发式知识和自适应遗传算法的复合材料层合板铺层优化模型,采用带置信度的IF-THEN模糊表达方式表达层合板铺层启发式知识,以蔡-希尔(Tsai-Hill)强度准则建立自适用遗传算法的适应度函数,在原有约束的基础上增加了铺层启发式知识约束.算例应用上述模型求解层合板的最佳铺层顺序,并将该结果和没有应用铺层知识约束的优化结果进行比较,证明了该模型的优越性和实用性.
参考文献
[1] | N. Zehnder;P. Ermanni .A methodology for the global optimization of laminated composite structures[J].Composite structures,2006(3):311-320. |
[2] | Boyang Liu;Raphael T. Haftka;Mehmet A. Akgun;Akira Todoroki .Permutation genetic algorithm for stacking sequence design of composite laminates[J].Computer Methods in Applied Mechanics and Engineering,2000(2/4):357-372. |
[3] | Ching-Chieh Lin;Ya-Jung Lee.Stacking sequence optimization of laminated composite structures using genetic algorithm with local im-provement[J].Computers & Structures,2004(63):339-345. |
[4] | G. Soremekun;Z. Ghrdal;R.T. Haftka .Composite laminate design optimization by genetic algorithm with generalized elitist selection[J].Computers & structures,2001(2):131-143. |
[5] | Sargent PM;lge DO;Ball RN .Design of laminate composite lay ups using genetic algorithm[J].Engineering With Computers,1995,11:59-69. |
[6] | Lin CC;Lee YJ .Stacking sequence optimization of laminated com-posite structures using genetic algorithm with local improvement[J].Computers & Structures,2004,63:339-345. |
[7] | Muc A;Gurba W .Genetic algorithms and finite element analysis in optimization of composite structures[J].Computers & Structures,2001,54:275-281. |
[8] | Park JH;Hwang JH;Lee CS;Hwang W .Stacking sequence design of composite laminates for maximum strength using genetic algorithms[J].Computers & Structures,2001,54:217-231. |
[9] | Ozgutr Erdal;Fazil O Sonmez .Optimum design of composite lami-nates for maximum buckling load capacity using simulated annealing[J].Computers & Structures,2005,71:45-52. |
[10] | 许玉荣,陈建桥,罗成,王向阳.复合材料层合板基于遗传算法的可靠性优化设计[J].机械科学与技术,2004(11):1344-1347. |
[11] | 王向阳,郭奔.基于最终失效强度的层合板结构优化分析[J].武汉理工大学学报(交通科学与工程版),2006(01):140-142,149. |
[12] | 鲁大伟,李书.应用免疫遗传算法优化设计层合板铺层顺序[J].北京航空航天大学学报,2005(02):247-250. |
[13] | 王共冬,刘文剑,金天国.计算机辅助树脂传递模塑成型工艺系统研究[J].计算机集成制造系统,2005(05):646-651. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%