时玻璃钢材料进行室温下的真空性能试验,获得被测材料的出气率和出气成分,根据测试参数对复合材料杜瓦进行结构设计,为提高复合材料杜瓦性能提供理论依据.
Fiberglass reinforced composites were tested at the room temperature for evaluating their vacuum performances,out gassing rate and the composition of the gasses were obtained from experimental data.Based on the experimental data,the structural design of the composite Dewar was carried out,this provided the theoretical basis for improved the quality of the composite Dewar.
参考文献
| [1] | 达道安.真空设计手册[M].北京:国防工业出版社,2004 |
| [2] | 徐烈.低温技术[M].上海:上海交通大学出版社,1988 |
| [3] | 徐烈;朱卫东;汤晓英.低温绝热与贮运技术[M].北京:机械工业出版社,1999 |
| [4] | 陈国邦.低温工程材料[M].杭州:浙江大学出版社,1998 |
| [5] | 张存泉,徐烈,邓东泉,赵兰萍.低温真空多层绝热结构热阻的理论分析[J].低温工程,2001(05):37-41. |
| [6] | 徐烈;周淑亮;曹庆.玻璃钢的放气性能研究[A].浙江,1993:67-70. |
| [7] | 阎守胜;陆果.低温物理实验的原理与方法[M].北京:科学出版社,1985 |
| [8] | 李卓球;岳红军.玻璃钢管与容器[M].北京:科学出版社,1990 |
| [9] | 高本辉;戴善述.真空材料常温出气率的简捷测量[J].现代科学仪器,1964(02):93. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%