本文通过研究针织结构对流体渗透率的影响,探索了一种高渗透率的玻纤针织结构织物,用以取代常用的导流网等介质,改善了VARTM工艺中遗弃物对环境造成的不良影响,节省了原材料并降低了生产成本.
By studying the fluid permeability affected by knitting structure,the paper finds out a kind of glass fiber knitted fabric structure with hiigh permeability to replace the commonly used high permeability medium,so as to improve the bad effects to environment by abandon useless stuff in VARTM progress,and save raw materials and lower production costs.
参考文献
| [1] | 徐伟,李敏,张佐光.真空压力下液体沿炭纤维织物铺层厚度方向的渗透特性[J].复合材料学报,2006(03):10-14. |
| [2] | Labajos-Broncano L;Gonzblez2Martin M L;Bruque J M.On the use of Washburnp's equation in the analysis of weisht-time-measurements obtained from imbibition experiments[J].Journal of Colloid and Interface Science,1999(219):275-281. |
| [3] | L.Labajos-Broncano;M.L.Gonzalez-Martin;J.M.Bruque;C.M.Gonzalez-Garcia .Influence of the Meniscus at the Bottom of the Solid Plate on Imbibition Experiments[J].Journal of Colloid and Interface Science,2001(1):79-83. |
| [4] | Wen-Bin Young .Capillary impregnation into cylinder banks[J].Journal of Colloid and Interface Science,2004(2):576-580. |
| [5] | Labajos-Broncano L.;Gonzalez-Martin ML.;Bruque JM. .On the evaluation of the surface free energy of porous and powdered solids from imbibition experiments: equivalence between height-time and weight-time techniques[J].Journal of Colloid and Interface Science,2003(1):171-178. |
| [6] | 张锐,郑威,袁秀梅,高泉喜,王昭亮.复合材料的真空辅助成型工艺研究[J].工程塑料应用,2005(06):33-35. |
| [7] | 李柏松,王继辉,邓京兰.真空辅助RTM成型技术的研究[J].玻璃钢/复合材料,2001(01):17-18,23. |
| [8] | 赵渠森,赵攀峰.真空辅助成型工艺（VARI）研究[J].纤维复合材料,2002(01):42-46. |
| [9] | 赵渠森,赵攀峰.真空辅助成型技术（一）[J].高科技纤维与应用,2002(03):22-27. |
| [10] | 王芳 .沟槽型VARTM成型技术的研究[D].天津工业大学,2006. |
| [11] | K Ken Han;William Lee;Brain P Rice.Measurements of the permeability of fiber preform and application[J].Composites Science and Technology,2000(60):2435-2441. |
| [12] | 刘金良,吴晓青.RTM工艺中树脂流动管道的优化设计[J].玻璃钢/复合材料,2008(06):41-43. |
| [13] | 史德军,胡福增,卢红,徐云龙.RTM一维单向流动模型的理论概况及研究[J].玻璃钢/复合材料,2004(01):3-5,37. |
| [14] | 范晓琴,吴晓青.RTM工艺中纤维渗透率的研究进展[J].玻璃钢/复合材料,2006(03):44-49. |
| [15] | 李文晓,薛元德,吴人洁.树脂传递模塑工艺中渗透率的测定[J].建筑材料学报,2000(03):258-263. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%