由13Cr可焊马氏体不锈钢(WMSGSS)制造的油气管线由于价格便宜,相对于昂贵的耐腐蚀合金来说是一个很有竞争力的选择.但是实验室试验和现场经历表明,13Cr马氏体不锈钢焊接接头热影响区发生了沿晶应力腐蚀开裂(IGSCC).对于低等级的马氏体不锈钢来说,沿晶应力腐蚀开裂机理被认为是在晶界的碳化物附近存在贫铬区.对于中等级和高等级马氏体不锈钢来说,只在实验室试验发现有应力腐蚀开裂.它们的应力腐蚀开裂机理还没有明确,虽然最可能的应力腐蚀开裂机理也被认为和低等级马氏体不锈钢的应力腐蚀开裂机理类似.原子力显微镜(AFM)已开始广泛用于材料显微组织和环境敏感断裂的研究中.高等级马氏体不锈钢焊接接头对晶间腐蚀/应力腐蚀开裂敏感性很有希望由原子力显微镜检测到.在原子力显微镜技术应用于这项研究之前,用由304不锈钢准备的不同敏化度的试样来确定它的适用性是十分有益的.本文用原子力显微镜研究了不同敏化程度的304不锈钢的晶问腐蚀敏感性并和SEM和EDs结果进行了对比.
参考文献
| [1] | Huizinga S;Ohm R K.Qualification and application limits of weldable supermartensitic 13Cr linepipe steels[J].NACE Corrosion,2001 |
| [2] | Huizinga S;Ohm R K.Experiences with qualification of weldable martensitic stainless steel pipe[J].NACE Corrosion,2003 |
| [3] | Wiillem van;Gestel.Girth weld failures in 13Cr sweet wet gas flow lines[J].NACE Corrosion,2004 |
| [4] | Masao Hayakawa;Saburo Matsuoka;Kaneaki Tsuzaki .Microstructural Analyses of Grain Boundary Carbides of Tempered Martensite in Medium-Carbon Steel by Atomic Force Microscopy[J].Materials transactions,2002(7):1758-1766. |
| [5] | Masao Hayakawa;Saburo Matsuoka;Yoshiyuki Furuya .Development of Observation Method for Tempered Martensite Microstructure Using Chemical Mechanical Polishing Technique[J].Materials transactions,2005(11):2443-2448. |
| [6] | Kohji MINOSHIMA;Yoshitaka OIE;Kenjiro KOMAI .In Situ AFM Imaging System for the Environmentally Induced Damage under Dynamic Loads in a Controlled Environment[J].ISIJ International,2003(4):579-588. |
| [7] | Thomas M A;Was G S .Behavior of grain boundary chemistry and precipitates upon thermal treatment of controlled purity alloy 690[J].Metallurgical and Materials Transactions A:Physical Metallurgy and Materials Science,1990,21A:2097-2107. |
| [8] | ASTM Standard A 262-1993a.ASTM Standard A 262-1993a.Standard practices for detecting susceptibility to intergrannlar attack in Austenitic stainless steels[S].,1999. |
| [9] | ASTM standard E 1558-1993.ASTM standard E 1558-1993.Standard guide for electrolytic polishing of metallographic specimens[S].,1999. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%