用蒙特卡罗方法模拟Pb-Sn二元共晶合金在给定的试验条件下晶粒长大过程和凝固组织的形态,及其物理参数温度梯度G,生长速率V,冷却速率GV和晶体的层间距λE之间的关系,模拟的结果与以前试验结果吻合较好.
参考文献
| [1] | 胡汉起.金属凝固原理[M].北京:机械工业出版社,2000:175. |
| [2] | 温俊芹,刘新田.蒙特卡罗方法及其在晶粒生长模拟中的研究进展[J].焊接技术,2002(02):1-3. |
| [3] | 张世兴,刘新田.计算机模拟焊接热影响区晶粒生长的研究进展[J].机械,2003(02):42-45. |
| [4] | 温俊芹,刘新田,莫春立.计算机模拟在焊接微观组织中的应用[J].电焊机,2003(01):21-24. |
| [5] | 张世兴,刘新田,温俊芹.焊接热影响区微观结构演化的蒙特卡罗计算机模拟方法[J].电焊机,2003(04):1-4,11. |
| [6] | Jackson K A;Hunt J D .Lamellar and rod eutectic growth[J].Transactions of the Metallurgical Society of AIME,1966,236:1129-1142. |
| [7] | Khan S.;Elliott R. .QUENCH MODIFICATION OF ALUMINIUM-SILICON EUTECTIC ALLOYS[J].Journal of Materials Science,1996(14):3731-3737. |
| [8] | Ourdjini A;Liu J;Euiott R .Eutectic spacing selection in the Al-Cu system[J].Materials Science and Technology,1994,10:312-318. |
| [9] | Gill S C;Kurz W .Rapidly solidifled Al -Cu alloys-1Experimental determination of the microstmcture selection MAP[J].Acta Metallurgica,1993,41(12):3563-3573. |
| [10] | Qiang Yu;Sven K. Esche .A Monte Carlo algorithm for single phase normal grain growth with improved accuracy and efficiency[J].Computational Materials Science,2003(3):259-270. |
| [11] | Li Hu;Wang Guanghou;Ding Feng et al.Monte Carlo simulation of three-dimensional polycrystalline material[J].Materials Science and Engineering,2003,A357:153-158. |
| [12] | 刘国勋.金属学原理[M].北京:冶金工业出版社,1987:134. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%