为了延长汽车氧传感器的寿命,通常在氧传感器敏感元件的铂电极表面涂覆多孔陶瓷保护层.本文以尖晶石、氧化铝、氧化锌等为原料,通过控制各组分的配比和烧结工艺参数,制得了性能良好的多孔陶瓷保护层.
参考文献
[1] | 路顺,林健,陈江翠.氧化锆氧传感器的研究进展[J].仪表技术与传感器,2007(03):1-3,6. |
[2] | 耿卫芹,钱晓良,孙尧卿,罗志安.汽车氧传感器的失效及预防[J].传感器技术,2002(10):8-10. |
[3] | Liu M .Performance of a solid fuel cell utilizing hydrogen sulfide as fuel[J].Journal of Power Sources,2001,94:20-25. |
[4] | 宫德利;范煜 .粘结涂层附着性的测定方法及其影响因素[J].磨擦学学报,1986,02:108-120. |
[5] | 刘毅,劳令耳,袁望治,黄英才.纳米ZnO对纳米ZrO2(8Y)致密特性及电导率影响研究[J].无机材料学报,2003(05):1147-1151. |
[6] | 沈一丁;李小瑞.陶瓷添加剂[M].北京:化学工业出版社,2004:203-208. |
[7] | 路顺,林健,张舜.ZrO2氧传感器多孔保护层研究[J].玻璃与搪瓷,2006(05):7-10,41. |
[8] | Junya Kondoh .Aging strengthening of 8 mol percent yttria-fully-stabilized zirconia[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2004(1/2):285-290. |
[9] | Evguenia Karapetrova;Roland Platzer;John A. Gardner .Oxygen Vacancies in Pure Tetragonal Zirconia Powders: Dependence on the Presence of Chlorine during Processing[J].Journal of the American Ceramic Society,2001(1):65-70. |
[10] | Hidemoto Shiga;Tatsuya Okubo;Masayoshi Sadakata .Preparation of Nanostructured Platinum/Yttria-Stabilized Zirconia Cermet by the Sol-Gel Method[J].Industrial & Engineering Chemistry Research,1996(12):4479-4486. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%