采用粉末冶金技术,在一定压力和温度下,制取致密块体高强度Al90Mn8Ce2合金,其尺寸为φ20mm×10mm.在553K～853K温度下,压力为1.2GPa,保压时间为30分,合金的空隙率小于1%.在温度为773 K压制,合金抗压强度为895MPa,随着压制温度的进一步增加,抗压强度降低.
参考文献
| [1] | Alison G A;Barr J W;Cornell D A.1 ed Kutz M Mechanical Engineers' Handbook[M].New York: John Wiley & Sons Inc,1986:147-159. |
| [2] | Cahn R W .Aluminum-based glassy alloys[J].Nature,1989,341:183-184. |
| [3] | Inoue A .Amorphous, nanoquasicrystalline and nano-crystalline alloys in Al-based systems[J].Progress in Materials Science,1998,43:365-517. |
| [4] | A.Inoue .Stabilization of metallic supercooled liquid and bulk amorphous alloys[J].Acta materialia,2000(1):279-306. |
| [5] | Kim Y H;Inoue A .Ultrahigh tensile strengths of Al88Y2Ni9M1 (M=Mn or Fe) amorphous alloys containing finely dispersed fcc-Al particles[J].Materials Transactions,1990(31):747-751. |
| [6] | Watanabe M;Inoue A;Kimura H M .High mechanical strength of rapidly solidified Al92Mn6Ln2 (Ln=Lanthanide Metal) alloys with finely mixed icosahedral and Al phases[J].Materials Transactions,1993(34):162-168. |
| [7] | Wang J Q;Tseng M K;Hao Y Y et al.An investigation of the microstucture and mechanical behavior of novel nanocrystalline Al-Fe-V-Si-Mm alloy ribbons[J].Materials Science and Engineering,1998,A247:51-57. |
| [8] | Inoue A.;Kimura H. .High Mechanical Strength of Al-(V, Cr, Mn)-(Fe, Co, Ni) Quasicrystalline Alloys Prepared by Rapid Solidification[J].Materials transactions,1996(6):1287-1282. |
| [9] | Beeli C;Nissen H U;Jiang Q .Crystallization in amorphous NiZr2, studied by HREM[J].Materials Science and Engineering,1991,A133:346-350. |
| [10] | Jiang Q;Sui Z X;Li J C et al.Specific heat and interface energy of nanostructured ZrAlNiCuCo alloy[J].Journal of Materials Science and Technology,1997,13:284-288. |
| [11] | Zhao M;Li J J;Jiang Q .Specific heat measurements of Zr65Al75Ni10Cu15Co25 alloy[J].Transaction of nonferrous metal society,1999,9:48-52. |
| [12] | Zhao M;Li J J;Jiang Q .Glass transition and thermodynamic function of Zr65Al75Ni10Cu15Co25 alloy[J].Transaction of nonferrous metal society,1999,9:255-259. |
| [13] | Zhao M.;Jiang Q.;Zhou M. .Zn-Al eutectoid nanocrystals produced by alloying[J].Journal of Materials Science Letters,1998(24):2079-2081. |
| [14] | Qing Jiang .Size-dependent Initial Sintering Temperature of Ultrafine Particles[J].Journal of Materials Science & Technology,1998(2):171-172. |
| [15] | J. G. Dash .History of the search for continuous melting[J].Reviews of Modern Physics,1999(5):1737-1743. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%