欢迎登录材料期刊网

材料期刊网

高级检索

采用真空熔炼的方法制备了高强度、高导电的Cu-Ag-Cr和Cu-Ag-Cr-Ce合金,通过显微硬度测试、电导率测试、抗拉强度测试等方法,对这两种合金的性能进行了研究,并探讨了Ce对Cu-Ag-Cr合金性能的影响.结果表明,微量Ce的加入,能够提高Cu-Ag-Cr合金的显微硬度、抗拉强度,改善合金的导电性能;并明显细化Cu-Ag-Cr合金的晶粒;同时抑制合金的再结晶过程,使其再结晶温度相对提高50℃左右.

参考文献

[1] Song K;Xing J;Liu P et al.Optimization of the processing parameters during internal oxidation of Cu-Al alloy powders using an artificial neural network[J].Materials & Design,2005,26(04):337-343.
[2] Xie M.;Lu XY.;Shi A.;Den ZM.;Jang H.;Zheng FQ.;Liu JL. .Investigation on the Cu-Cr-RE alloys by rapid solidification[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(0):529-533.
[3] 黄崇祺.轮轨高速电气化铁路接触网用接触线的研究[J].中国铁道科学,2001(01):1-5.
[4] Holzwarth U.;Stamm H. .The precipitation behaviour of ITER-grade Cu-Cr-Zr alloy after simulating the thermal cycle of hot isostatic pressing[J].Journal of Nuclear Materials: Materials Aspects of Fission and Fusion,2000(1):31-45.
[5] 贾淑果,刘平,康布熙,田保红,郑茂盛,周根树.微量稀土对Cu-Ag接触线性能的影响[J].功能材料,2004(04):445-447.
[6] Song Kexing;Xing Jiandong;Dong Qiming et al.Internal oxidation of dilute Cu-Al alloy powers with oxidant of Cu2O[J].MATERIALS SCIENCE & ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING,2004,380:117-121.
[7] Jia shuguo;Zheng Maosheng;Liu Ping et al.Aging behavior studies in a Cu-Ag-Zr-Ce alloy[J].Journal of Rare Earths,2005,23(z):423-426.
[8] Fujii T;Ogawa M;Onaka S .Preferential precipitation of Cr particles on dislocations in a Cu-0.32mass%Cr alloy[J].Journal of the Japan Institute of Metals,1998,62(04):301-309.
[9] S. Nagarjuna;K. K. Sharma;I. Sudhakar;D. S. Sarma .Age hardening studies in a Cu-4.5Ti-0.5Co alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2001(1/2):251-260.
[10] Tang N Y.Precipitation and aging in high-conductivity Cu-Cr alloys with additions of zirconium magnesium[J].Mater Sci Techno,1985(01):270-275.
[11] 快速凝固时效硬化提高Cu-Cr和Cu-Cr-Zr合金的强度[J].Acta Materialia,1997(1):177-190.
[12] Weatherly G C;Humble P D .Precipitation in a Cu-0.55wt%Cr alloy[J].Acta Metallurgica Et Materialia,1979,27(10):1815-1828.
[13] 贾淑果,刘平,田保红,郑茂盛,周根树,娄花芬.高强高导Cu-0.1Ag-0.11Cr合金的强化机制[J].中国有色金属学报,2004(07):1144-1148.
[14] S.G. Jia;P. Liu;F.Z. Ren .Wear behavior of Cu-Ag-Cr alloy wire under electrical sliding[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(1/2):262-267.
[15] S. G. Jia;M. S. Zheng;P. Liu;F. Z. Ren;B. H. Tian;G. S. Zhou;H. F. Lou .Aging properties studies in a Cu-Ag-Cr Alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):8-11.
[16] 杜挺.稀土元素在金属材料中的一些物理化学作用[J].金属学报,1997(01):69-73.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%