本文总结了铝阳极氧化膜封孔技术的发展和工业应用现况.介绍沸纯水封孔、高温水蒸气封孔、冷封孔(含镍和无镍)、中温封孔和有机聚合物膜等工艺.突出介绍了在工业上广泛应用的沸水封孔、氟化镍为基的冷封孔和电泳沉积丙烯酸树脂技术,还介绍了欧洲对于封孔质量评价方法的最新改进措施.
参考文献
| [1] | Lopez E;Otero E;Conzalez J A et al.The behavior of anodized aluminium in the salt fog test[J].Aluminium,1996,72(10):733. |
| [2] | Strzzzi E;Bellei S.The Sealing of anodic oxide layer on Aluminium and its Alloys[A].Modene Italy,1998 |
| [3] | 李宜.铝阳极氧化膜封孔处理[J].材料保护,1989(11):4. |
| [4] | John S;Shenoi B A .Sealing Anodized Aluminium[J].Metal Finishing,1976,73(07):31. |
| [5] | LI Yi;ZHU Zufang .Cold sealing Mechanism of Anodic film on Aluminium I. Composition and Structure of cold-sealing oxide film[J].Plating and Surface Finishing,1993,80(09):79. |
| [6] | LI Yi;ZHU Zufang .Cold sealing Mechanism of Anodic film on Aluminium II Cold sealing Model of oxide film[J].Plating and Surface Finishing,1993,80(10):77. |
| [7] | Otero E;Lopez V;Gozalez J A .Aging of cold-sealing Aluminium oxide film at room temperature and at 50℃[J].Plating and Surface Finishing,1996,83(08):50. |
| [8] | Short E P;Morite A .The mechanism of cold sealing[J].Plating and Surface Finishing,1988,75(06):102. |
| [9] | [P].日本专利:89195300A |
| [10] | [P].欧洲专利:0193964 |
| [11] | [P].日本专利:9015192A |
| [12] | Sato T;Kaminaga K.Theories of Anodized Aluminium[M].Kallos Publishing Co. LTD Tokyo Japan,1997:189. |
| [13] | Strazzi E;Bellei S .A revolutionary Ni-free medium temperature seal[J].Aluminium Finishing,1997,17(02):22. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%