研究了简单氯化物体系中锌镍磷合金电镀工艺。探讨了镀液组成及工艺条件对合金镀层中镍、磷含量的影响，并对合金镀层的耐蚀性进行了测试。结果表明：锌镍磷合金镀层的耐蚀性优于锌镍合金，且其耐蚀性随镀层中磷含量的增大而提高。
Zinc-nickel-phosphorus alloy plating in simple chloride bath was studied.The effect of bath components and plating parameters on nickel and phosphorus content in the obtained alloy deposits was studied, and corrosion resistance of the obtained alloy deposits was tested. The results show that corrosion resistance of zinc-nickel-phosphorus alloy deposits is superior to that of zinc-nickel alloy deposits which is in direct ratio to the phosphorus content in alloy deposits.
参考文献
| [1] | Krishniyer A;Ramasubramanian M;Popov B N .Electrodeposition & Characterization of a Corrosion Resistant Zinc-Nickl-Phosphorus Alloy[J].Plating and Surface Finishing,1999,86(01):99-103. |
| [2] | 黄清安;唐桂秋;陈永言.电沉积Zn-Ni-P合金的研究[J].武汉大学学报（理学版）,1994(03):89-93. |
| [3] | Swathiraja S;Mikhail Y M .Characterization of New Corrosion Resistant Nickel-Zinc-Phosphorus Alloy Obtained by Electrodeposition[J].Journal of the Electrochemical Society,1989,136(08):2188. |
| [4] | 张昭 .Zn-Fe-P合金电镀工艺及基础理论研究[D].中南工业大学,1999. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%