无铅封装工艺是IC制造商为了顺应电子产品无铅化趋势而发展起来的,但存在晶须生成的潜在威胁.因此,锡须的抑制方法成为研究的关键.对电子集成电路封装行业中常见的9种抑制锡须的方法--避免局部镀纯锡,选择亚光或低应力镀锡,选择适宜的镀层厚度,选择适宜的阻挡层,纯锡镀层表面回流处理,退火处理,避免在纯锡镀层表面进行压负载操作,采用有机涂层或其它金属涂层,采用适宜的电镀添加剂等进行了总结,为IC业无铅电镀提供参考依据.
参考文献
| [1] | BRUSSE J A;EWELL G J;SIPLON J P.Tin whiskers:attributes and mitigation[A].,2002:67-80. |
| [2] | ARNOLD S M .Bell Telephone System Technical Publications Monograph 3304[R].Bell Telephone System,1959. |
| [3] | COMPTON K G;MENDIZZA A;ARNOLD S M .Filamentary growths on metal surfaces-Whiskers[J].Corrosion,1951,7(10):327-334. |
| [4] | NAGAI T;NATORI K;FURASAWA T .Rate of short circuit caused by whisker growth on Zn electroplated steels in electronic appliance[J].Journal of the Japan Institute of Metals,1989,53(03):303-307. |
| [5] | NEUMANN H-G .Whisker growth from thin evaporated cadmium films[J].THIN SOLID FILMS,1971,8(05):R55-R58. |
| [6] | CUNNINGHAM K M;DONAHUE M P.Tin whiskers:mechanisms of growth and prevention[A].,1990:569-575. |
| [7] | SCHETTY R.Minimization of tin whisker formation for Lead-Free electronics finishing[A].,2000:S0221-S0229. |
| [8] | BRITTON S C .Spontaneous growth of whiskers on tin coatings:20 years of observation[J].Trans Inst of Metal Finishing,1974,52(04):95-102. |
| [9] | WHITLAW K J;CROSBY J N.An investigation into methods for minimizing tin whisker growth[A].AESF,2003:289-298. |
| [10] | OSTERMAN M .Mitigation strategies for tin whiskers[R].Baltimore:CALCE EPSC,2002. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%