对用渗流法制备的泡沫铝镁合金进行了准静态压缩实验,测试了其压缩应力-应变曲线,研究了泡沫铝镁合金的准静态压缩力学行为及其吸能性,并与泡沫纯铝的静态压缩性能进行了比较.实验结果表明, 泡沫铝镁合金的压缩过程具有明显的三阶段变形特征,即弹性段、塑性平台段和压实段;随孔径的增加,泡沫铝镁合金的屈服强度升高、吸能量上升.由于铝镁合金的强度远高于纯铝,从而使泡沫铝镁合金的压缩屈服强度及吸能性均显著高于泡沫铝.
参考文献
| [1] | A. Paul;U. Ramamurty .Strain rate sensitivity of a closed-cell aluminum foam[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):1-7. |
| [2] | Tbeals J;Thompson M S .Density gradient effects on aluminium foam compressive behavior[J].Journal of Materials Science,1997,32:3595-3600. |
| [3] | 王斌,何德坪,舒光冀.泡沫Al合金的压缩性能及其能量吸收[J].金属学报,2000(10):1037-1040. |
| [4] | Nieh T G;Higashi K;Wadaworth J .Effect of morphology on the compressive propertises of open-cell aluminum foams[J].Materials Science and Engineering,2000,A283:105-110. |
| [5] | Yamada Y;Sakaguchi Y;Mabuchi M;Nakamura M;Asahina T;Mukai T;Kanahashi H;Higashi K;Shimojima K .Compressive properties of open-cellular SG91A Al and AZ91 Mg[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1999(2):455-458. |
| [6] | Fusheng H;Zhengang Z .The mechanical behavior of foamed aluminum[J].Journal of Materials Science,1999,34:291-299. |
| [7] | 程和法,黄笑梅,陈国宏.渗流法制备泡沫铝合金工艺的研究[J].轻合金加工技术,2001(01):38-39,42. |
| [8] | Gisbon L J;Ashby M F.Cellular Solids: Structure and Propertises,2nd ed[M].Cambridge:Cambridge University Press,1997 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%