欢迎登录材料期刊网

材料期刊网

高级检索

采用53式7.62mm穿燃弹倾斜入射10mm厚、硬度为HRC44~56的Cr-Ni-Mo系试验装甲钢进行了穿甲试验,研究了在不同硬度状态下,硬度对装甲钢板安全角的影响.依据倾斜入射的穿甲特征和靶试后对靶板损伤情况的分析认为:弹丸在倾斜入射靶板时,随着靶板硬度增加,靶板安全角减小,抗弹性能提高,这主要是由于高硬度靶板使弹丸产生断裂和破碎及弹丸在开坑和侵彻阶段的阻力加大所致.

参考文献

[1] Edwards M R;Mathewson A .The ballistic properties of tools steels as a potential improvised armour plate[J].International Journal of Impact Engineering,1997,19(04):297-309.
[2] Dikshit S N .The influence of plate harness on the ballistic penetration of thick steel plate[J].International Journal of Impact Engineering,1995,6(02):293-320.
[3] 董瀚;李桂芬;陈南平 .高强度装甲钢的抗弹性能研究[J].钢铁,1996,31(10):67-71.
[4] 董瀚;李桂芬;王步震;陈南平 .高强度钢在高速冲击载荷下的动态响应[J].兵器材料科学与工程,1995,18(03):10-16.
[5] Manganello S J;Abbott K H .Metallurgical factors affecting the ballistic behavior steel targets[J].Journal of Materials,1972,7(02):231-239.
[6] Gupta N K;Madhu V .An experimental study of normal and oblique impact of hard-core projectile on single and layered plates[J].International Journal of Impact Engineering,1997,19(5-6):395-414.
[7] Gupta N K;Madhu V .Normal and oblique impact of energy projectile on mild steel plates[J].International Journal of Impact Engineering,1992,12(03):333-343.
[8] 张自强 .均质装甲钢倾角效应的试验研究[J].兵器材料科学与工程,1995,18(04):31-38.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%