研究了不同组织和摩擦条件下蒙乃尔合金的摩擦磨损性能.结果表明:无论在干摩擦条件还是航空煤油润滑条件下,具有单相显微组织的蒙乃尔合金具有最佳的摩擦磨损性能,即摩擦因数和磨损失重量均最低,而铸态组织,尤其晶粒大,其摩擦磨损性能都较差.
参考文献
| [1] | 乐精华.铸镍及镍合金的应用[J].阀门,1993(02):23-26. |
| [2] | 董元源.蒙乃尔铸造合金的工艺特性[J].阀门,1985(03):17-19. |
| [3] | 林慧国;周人俊.世界钢号手册[M].北京:机械工业出版社,1985:203-257. |
| [4] | 孟家燕.美国蒙乃尔合金体系[J].材料开发与应用,1992(01):44. |
| [5] | 雷廷权 等.70Cu-30Ni合金海水腐蚀产物膜形成过程[J].金属学报,1997,10(08):43-46. |
| [6] | Dey G K;Mukhopadnyan P .Precipitation in the Ni-Cu-base alloys monel K-500[J].Materials Science and Engineering,1986,84:177-189. |
| [7] | Dey G;Tewari R;Rao P .Precipitation hardening in nickel-copper base alloy monel K-500[J].Metallurgical and Materials Transactions,1993,24:2709-2719. |
| [8] | 陆世英;康喜范.镍基及铁镍基耐蚀合金[M].北京:化学工业出版社,1989:118-137. |
| [9] | 杨光,傅金权,冯志宏.Monel合金的工艺特点和生产实践[J].辽宁工学院学报（自然科学版）,2000(03):40-41. |
| [10] | Dzawski Z R;Stobrawa J.Thermo mechanical processing of Cu-Ni-Si-Cr-Mg alloy[J].Materials Science and Technology(in Japanese),1993(09):142-148. |
| [11] | Lockyer S A;Noble F W .Precipitate structure in Cu-Ni-Si[J].Journal of Materials Science,1994,29(01):218-226. |
| [12] | Kim Y G;Ryu C.Designing an advanced copper-alloy leadframe material[J].Semiconductor International,1985(04):250-252. |
| [13] | 赵冬梅,董企铭,刘平,康布熙,金志浩.超高强度Cu-Ni-Si合金时效过程研究[J].材料热处理学报,2002(02):20-23. |
| [14] | Teplitskiy M D;Nikolayev A K;Revina N I et al.The structure and properties of aging copper-nickel based alloys[J].Fizika Metallov I Metallovedenie,1975,40:1240. |
| [15] | Kim Y G;Seong T Y;Han J H et al.Effect of heat treatment on precipitation behavior in a Cu-Ni-丝-P alloy[J].Journal of Materials Science,1986,21(04):1357-1362. |
| [16] | Hidemichi Fujiwara;Tatsuo Sato;Akihiko Kamio .Effect of alloy composition on precipitation behavior in Cu-Ni-Si alloy[J].Journal of the Japan Institute of Metals,1998,36(04):301-309. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%