高破甲性能精密铜药型罩材料的织构研究

兵器材料科学与工程 , 2005, 28(4): 4-9. doi: 10.3969/j.issn.1004-244X.2005.04.002

高破甲性能精密铜药型罩材料的织构研究

张全孝 ^1, , 张新明 ^2, , 贾万明 ^3, , 史利军 ^4,

1.中南大学,材料科学与工程学院,湖南,长沙,410083;中国兵器科学研究院,宁波分院,浙江,宁波,315103

2.中南大学,材料科学与工程学院,湖南,长沙,410083

3.中国兵器科学研究院,宁波分院,浙江,宁波,315103

4.中国兵器科学研究院,宁波分院,浙江,宁波,315103

关键词：药型罩 , 织构 , 各向同性 , 各向异性 , 破甲性能

Study on textures of the precision copper shaped charge material with high properties

运用X射线衍射仪对两种铜药型罩材料进行了织构测量和分析,研究不同的加工工艺对铜药型罩材料的显微组织及织构的影响,结果表明:B罩晶粒细小,具有均匀弱织构,各向同性好,而A罩织构较强,呈现明显的各向异性,A、B两罩沿母线方向的各向异性程度均大于沿周向的,且罩底各向异性程度最大,罩底的织构沿周向A的差别大,B的差别小;A、B两罩罩体上下部分织构差别依次减弱,即A罩差别较大,B罩罩底和罩顶织构相差最小.靶试结果表明,B罩具有高的破甲性能.

参考文献

[1]	Bransky I;Faibish E Millers.Investigation of shaped charges with conical and hemispherical liners of tungsten alloys[A].,1987:360-369.
[2]	Jamet F;lightenberger A.Investigation of copper-tungsten shaped charge liners[A].,1987:387-392.
[3]	James D Walker.Incoherence of shaped charge Jets[C].14th IBS,Quebec,Canada,1993:356-364.
[4]	Lichtenkerger A.Shaped charges with molybdenum liner[A].San Francisco,USA,1996:450-461.
[5]	Lichtenkerger A;Louis Zernow.Increase of jet ductility with cold Pressed liners and recovery of jet fragment[A].Ballisticsm,Quebec,Canada,1993:370-382.
[6]	Wright Stuart I;Bingert John F;Louis Zernow .Microtextural zones in a copper shaped charge particle[J].Materials Science and Engineering,1996,225:53-60.
[7]	Bourne B;Jones P N;Warren R H.Grain size and crystallographic texture effects on the performance of shaped charge[A].Quebec,Canada,1993:420-427.
[8]	Lichtenkerger A .Influence of the Structural and Metallurgical State of Liner on the Performance of Shaped Charge[R].ISL 68301 France,1999.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网

高破甲性能精密铜药型罩材料的织构研究

Study on textures of the precision copper shaped charge material with high properties

参考文献