对08X18H10T不锈钢进行单轴及多轴非比例循环加载低周疲劳试验及其微结构的观察,分析单轴及多轴非比例加载低周疲劳特性及其变形微观机理,结果表明:多轴非比例加载过程中,奥氏体不锈钢08X18H10T产生明显的非比例附加强化;在应变幅值较大时,塑性变形不仅通过滑移方式进行,还有孪生变形方式,微观形貌由平面状滑移向波纹状滑移转化.
参考文献
| [1] | Veronique Aubin;Philippe Quaegebeur;Suzanne Degallaix .Cyclic plasticity of a duplex stainless steel under non-proportional loading[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2003(1/2):208-215. |
| [2] | Jacques Stolarz;Natacha Baffie;Thierry Magnin .Fatigue short crack behaviour in metastable austenitic stainless steels with different grain sizes[J].Materials Science and Engineering,2001,A319-321:521-526. |
| [3] | 陈旭,田涛,安柯.1Cr18Ni9Ti不锈钢的非比例循环强化性能[J].力学学报,2001(05):698-705. |
| [4] | 吕涛;杨晓华;李年 等.2Cr13钢低周疲劳损伤演变规律研究[J].机械强度,1999,21(02):118-121. |
| [5] | M. Mineur;P. Villechaise;J. Mendez .Influence of the crystalline texture on the fatigue behavior of a 316L austenitic stainless steel[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(2):257-268. |
| [6] | Gerland M;Alain R;AitSaadi B et al.Low cycle behaviour in vacuum of a 316L-type austenitic stainless steel between 20 and 600℃-Part:Dislocation structure evolution and correlation with cyclic behaviour[J].Materials Science and Engineering,1997,A229:68-86. |
| [7] | 何国求,陈成澍,高庆,孙训方,沈志云.不锈钢多轴非比例加载低周疲劳的研究[J].机械工程学报,1999(01):47-50. |
| [8] | Doong S H;Socie D F;Robertson I M .Dislocation substructure and nonproportional hardening[J].ASME J Eng Mat Techno,1990,112(04):456-464. |
| [9] | 何国求,陈成澍,高庆.氮对316系列不锈钢低周疲劳特性的影响[J].西南交通大学学报,1999(03):343-348. |
| [10] | Kaschner GC.;Gibeling JC. .A study of the mechanisms of cyclic deformation in f.c.c. metals using strain rate change tests[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(1/2):170-176. |
| [11] | Heino S;Karlsson B .Cyclic deformation and fatigue behaviour of 7Mo-0.5N superaustenitie stainless steel-slip characteristics and development of dislocation structures[J].Acta Materialia,2001,49:353-363.363. |
| [12] | 业成.0Cr18Ni9奥氏体不锈钢在低浓度NaCl溶液中的腐蚀疲劳裂纹扩展规律及机理研究[J].压力容器,2000(02):27. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%