采用双丝MIG、单丝MIG焊接工艺在相同条件下对616高强钢进行了焊接.分析焊缝内部的质量、焊接接头的组织、焊接接头的强度,对比两种工艺的焊接效率和线能量,研究结果表明:在焊缝内部质量、焊接强度方面,双丝焊优于单丝焊;在焊接效率上,双丝焊是单丝焊的3倍;在单位线能量上,双丝焊比单丝焊降低了32.1%.
参考文献
| [1] | Platz J .Two-wire technique increases the speed in MIG welding[J].Zvaranje,1996,45(06):46-49. |
| [2] | TIM MOREHEAD .Automatic Multiwire GMAW Multiplies Productivity[J].Welding Journal,2003(6):40-43. |
| [3] | smith A A;Houldcraft P T .High-current,mert-gas metal arc welding of aluminium[J].British Welding Journal,1958,9(05):421-426. |
| [4] | Needham J C;Smith A A .Arc and bead characteristics of the aluminium self-adjusting arc[J].British Welding Journal,1958,5(02):66-76. |
| [5] | Sugiyama .Reduction of smut in MIG welding of aluminium alloy application of the double wire MIG (DUM) welding process[J].Light Metal Welding Construction,1992,30(08):8-12. |
| [6] | Nakata Natsuda .Up-to-date weld solidification crack test methods and some examples of application to aluminium alloys[J].Light Metal Welding Construction,1982,20(03):101-111. |
| [7] | 徐文立,孟庆国,方洪渊,徐广印.高强铝合金板双丝焊温度场[J].焊接学报,2004(03):11-14. |
| [8] | 《金相图谱》编写组.金相图谱[M].北京:电子工业出版社,1980:3-4. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%