介绍喷射沉积技术的起源和发展,着重对Osprey工艺在国内外的研究状况进行较深入的讨论.根据目前喷射沉积技术的研究热点,主要介绍喷射沉积铝合金材料,如超高强/高韧铝合金、耐热铝合金、过共晶硅铝合金、电子封装Si-Al合金等新型高性能轻质材料的一些研究现状.展望了喷射沉积技术今后的发展趋势.
参考文献
| [1] | Brooks R G;Leatham A G;Coombs J S et al.The osprey process:a novel method of the production of forgings[J].Metallurgy and metals forming,1977,44(04):157-160. |
| [2] | Brooks R G;Moore C;Leatham A G et al.Ospray process[J].Powder Metallurgy,1977,20(02):100-102. |
| [3] | 张永安,熊柏青,朱宝宏,刘红伟,石力开,王洪斌,张济山.Al10Zn2.9Mg1.7Cu超高强铝合金的喷射成形制备研究[J].稀有金属,2003(05):609-613. |
| [4] | LavemiaE J.Microstructural and mechanical evaluations of spray-deposited 7XXX Al-alloys after conventional consolidation[J].Materials Science and Engineering,1994(179):614-618. |
| [5] | Santics M De.Structure and properties of rapidly solidified ultrahigh strength Al-Zn-Mg-Cu alloys produced by spray deposition[J].Materials Science and Engineering,1991(141):103-121. |
| [6] | 张七林;任颂赞.简明铝合金手册[M].上海:上海科学技术文献出版社,2001:2-10. |
| [7] | 武恭;姚良均;李震霞.铝及铝合金材料手册[M].北京:科学出版社,1997:255-256. |
| [8] | Froes F H.Advanced metals for aerospace and automotive use[J].Materials Science and Engineering,1994(A184):119-133. |
| [9] | 唐谊平,黎文献,谭敦强.FVS0812的制备与性能[J].铝加工,2003(01):5-9. |
| [10] | 庞华,邓江宁,张宝金,曾梅光.快速凝固Al-Fe-V-Si-Nd合金中纳米相转变动力学[J].中国有色金属学报,2000(04):487. |
| [11] | 崔成松,范洪波,来忠红,沈军,蒋祖龄,李庆春.喷射沉积Al-3.8Li-0.8Mg-0.4Cu-0.13Zr合金的显微组织与拉伸性能[J].中国有色金属学报,1996(04):127-131. |
| [12] | 夏德顺.航天运载器贮箱结构材料工艺研究[J].导弹与航天运载技术,1999(03):32-41. |
| [13] | Kanno M;Araki I;Cui Q.Precipitation behaviour of 7000alloys during retrogression and reaging treatment[J].Journal of Materials Science and Technology,1994(10):599-603. |
| [14] | 杨林,田冲,陈桂云,赵九洲,张永昌,叶恒强.喷射沉积AlZn12Mg2Cu2合金的组织结构及力学性能[J].材料工程,2002(02):23-26. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%