利用分层切片法重构物体的原理自主开发金属断裂面三维重构软件JHX-FSR,通过软件前处理模块和可视化后处理模块,分别获取金属断口的三维数据场和金属断口的三维重构结果、金属断口的定量可视化结果.分层切片法断口重构通过复杂切片二维轮廓的表面重构.重构空间几何形状复杂的断口整体形貌,从而得到精确的断口重构结果;将重构结果同断口三维数据场校验,证实该软件可较精确地重构断口;根据获取的断口宏观形貌三维数据场,对断口局部形貌特征定量可视化及定量测量,为断口智能化分析奠定一定的基础.分别通过断口定量反推、断口剖面二维切片图像定量分析和微裂纹三维重构3个方面阐述计算机分层切片法三维重构技术在金属断口定量分析中的应用和发展前景.
参考文献
| [1] | Xu-Dong Li .K Variations and Anisotropy: Microstructure Effect and Numerical Predictions[J].Journal of engineering materials and technology,2003(1):65-74. |
| [2] | Li Xu-Dong.Visualized simulation and modularized architecture of microstructure for composite materials Mesomechanics of computation and design of use-specific materials[A].Tokyo Japan,2003:259-270. |
| [3] | Stamp J;Scherer S;Gruber M et al.Reconstruction of surface topographies by scanning electron microscopy for application in fracture research[J].Applied Physics,1996,63:341-346. |
| [4] | Ammann J J;Hein L R;Nazar A M .Three-dimensional reconstruction of fracture surface[J].Materials Characterization,1996,36:379-386. |
| [5] | Abell Anne B;Lange Advida .Fracture mechanics modeling using images of fracture surfaces[J].Solids Structures,1996,35:4025-4030. |
| [6] | Wu K-R.;Yan A. .Reconstruction and analysis of 3-D profile of fracture surface of concrete[J].Cement and Concrete Research,2000(6):981-987. |
| [7] | 钟群鹏;田永江.金属断口宏观特征形态与力学参量之间的定量关系[J].兵器科学与力学,1984(01):1-7. |
| [8] | 荣伟;马茂元.金属断裂韧性与微观参量的关系[J].哈尔滨工程大学学报,1994(15):34-38. |
| [9] | J.M.Cairney;J.H.Schneibel .Examination of fracture surfaces using focused ion beam milling[J].Scripta materialia,2000(5):473-478. |
| [10] | Tripathi SK;Shukla N;Kulkarni VN .Correlation between ion beam parameters and physical characteristics of nanostructures fabricated by focused ion beam[J].Nuclear Instruments and Methods in Physics Research, Section B. Beam Interactions with Materials and Atoms,2008(8):1468-1474. |
| [11] | 钟群鹏;赵子华.断口学-中国工程院院士文库[M].北京:高等教育出版社,2005:106-115. |
| [12] | Baraka-Lokmane S .A new resin impregnation technique for characterizing fracture geometry in sandstone cores[J].International Journal of Rock Mechanics & Mining Sciences & Geomechanics Abstracts,2002,39:815-823. |
| [13] | 张亚明,王宗彦.断层数据的三维重构技术研究[J].华北工学院学报,2003(04):294-296. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%