镁合金板材轧制技术与工艺的研究进展

兵器材料科学与工程 , 2010, 33(5): 96-102. doi: 10.3969/j.issn.1004-244X.2010.05.027

镁合金板材轧制技术与工艺的研究进展

1.重庆大学,材料科学与工程学院,重庆,400045;国家镁合金材料工程技术研究中心,重庆,400044

2.重庆大学,材料科学与工程学院,重庆,400045;国家镁合金材料工程技术研究中心,重庆,400044

3.重庆长客城市轨道交通车辆有限责任公司,重庆,401133

4.重庆大学,材料科学与工程学院,重庆,400045;国家镁合金材料工程技术研究中心,重庆,400044

基金项目: 国家杰出青年科学基金(50725413) 中央高校基本科研业务费资助(CDJXS10132202) 国家"十一五"科技支撑计划重点项目(2007BAG06B04) 国家973重大基础研究项目(2007CB613700) 重庆市科技攻关项目(CSTC2009AB4008)

关键词：镁合金板材 , 轧制技术 , 工艺参数 , 轧制成形 , 晶粒细化

Research progress in rolling technology and process for magnesium alloy sheets

综述轧制工艺参数以及轧制技术对镁合金板材组织、力学性能及轧制成形性能的影响.详细阐述常规轧制技术和双辊铸轧、异步轧制、等径角轧制、累积复合轧制、交叉轧制等最新轧制技术的基本原理、特点和应用.分析不同的轧制技术对应的晶粒细化机制和织构特点.最后总结评价上述轧制技术与工艺,并指出目前存在的问题及今后的发展方向.

参考文献

[1]	曲家惠,岳明凯,刘烨.镁合金塑性变形机制的研究进展[J].兵器材料科学与工程,2009(02):116-119.
[2]	黄光杰,曹勇,陈江波,曾柯.高性能镁合金板材轧制技术的研究[J].材料导报,2009(11):94-97,103.
[3]	Feng Kang;Jing Tao Wang;Yong Peng .Deformation and fracture during equal channel angular pressing of AZ31 magnesium alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2008(1/2):68-73.
[4]	Zhan M Y;Li Y Y;Chen W P .Improving mechanical properties of Mg-Al-Zn alloy sheets through accumulative roll-bending[J].Transactions of Nonferrous Metals Society of China,2008,18:309-314.
[5]	Weijun Xia;Zhenhua Chen;Ding Chen;Suqing Zhu .Microstructure and mechanical properties of AZ31 magnesium alloy sheets produced by differential speed rolling[J].Journal of Materials Processing Technology,2009(1):26-31.
[6]	王广山,邸洪双,黄锋.立式双辊铸轧AZ31镁合金薄带试验研究[J].铸造,2009(04):322-325.
[7]	王伯健,徐萍,李姗,刘长瑞.退火温度对大变形热轧AZ31镁合金板材力学性能的影响[J].轻合金加工技术,2009(09):40-42,57.
[8]	于彦东,张凯锋,蒋大鸣,郑海荣,王长丽.轧制镁合金超塑性和超塑胀形[J].中国有色金属学报,2003(01):71-75.
[9]	吉泽升.日本镁合金研究进展及新技术[J].中国有色金属学报,2004(12):1977-1984.
[10]	Hiroyuki Hosokawa;Yasumasa Chino;Koji Shimojima .Mechanical Properties and Blow Forming of Rolled AZ31 Mg Alloy Sheet[J].Materials transactions,2003(4):484-489.
[11]	陈维平,陈宛德,詹美燕,李元元.轧制温度和变形量对AZ31镁合金板材组织和硬度的影响[J].特种铸造及有色合金,2007(05):338-341.
[12]	卢志文,汪凌云,潘复生,陈林.变形镁合金及其成形工艺[J].材料导报,2004(09):39-42.
[13]	Del Valle J A;Pe'rez-Prado M T;Ruano O A .Texture evolution during large strain hot rolling of the AZ61 Mg alloy[J].Materials Science and Engineering A,2003,355:68-78.
[14]	詹美燕,李元元,陈宛德,陈维平.大应变轧制技术制备细晶AZ31镁合金板材[J].华南理工大学学报（自然科学版）,2007(08):16-21,43.
[15]	Myagchilov S;Dawson PR .Evolution of texture in aggregates of crystals exhibiting both slip and twinning[J].Modelling and simulation in materials science and engineering,1999(6):975-1004.
[16]	汪凌云,黄光杰,陈林,黄光胜,李伟,潘复生.镁合金板材轧制工艺及组织性能分析[J].稀有金属材料与工程,2007(05):910-914.
[17]	H. Gao;S.C. Ramalingam;G.C. Barber .Analysis of asymmetrical cold rolling with varying coefficients of friction[J].Journal of Materials Processing Technology,2002(1/2):178-182.
[18]	张文玉,刘先兰.异步轧制技术及其在镁合金中的应用[J].锻压技术,2008(02):1-5.
[19]	H. Watanabe;T. Mukai;K. Ishikawa .Effect of temperature of differential speed rolling on room temperature mechanical properties and texture in an AZ31 magnesium alloy[J].Journal of Materials Processing Technology,2007(26):644-647.
[20]	张文玉,刘先兰,陈振华,夏伟军.非对称/对称轧制AZ31镁合金微观组织研究[J].材料工程,2008(06):25-28.
[21]	Watanabe H;Mukai T;Ishikawa K .Differential speed rolling of an AZ31 magnesium alloy and the resulting mechanical properties[J].Journal of Materials Science,2004,39:1477-1480.
[22]	K. Iwanaga;H. Tashiro;H. Okamoto;K. Shimizu .Improvement of formability from room temperature to warm temperature in AZ-31 magnesium alloy[J].Journal of Materials Processing Technology,2004(0):1313-1316.
[23]	Yu Yoshida;Lawrence Cisar;Shigeharu Kamado .Effect of Microstructural Factors on Tensile Properties of an ECAE-Processed AZ31 Magnesium Alloy[J].Materials transactions,2003(4):468-475.
[24]	Koike J .New deformation mechanisms in fine-grain Mg alloy[J].Materials Science Forum,2003,419/422:189-194.
[25]	Cheng Y Q;Chen Z H;Xia W J et al.Effect of channel clearance on crystal orientation development in AZ31 magnesium alloy sheet produced by equal channel angular roiling[J].Journal of Materials Processing Technology,2007,184:97-101.
[26]	仇治勤,陈振华,夏伟军,陈鼎.等径角轧制AM60镁合金板材的显微组织与力学性能[J].机械工程材料,2008(05):48-51.
[27]	Saito Y.;Tsuji N.;Sakai T.;Utsunomiya H. .Novel ultra-high straining process for bulk materials - Development of the accumulative roll-bonding (ARB) process[J].Acta materialia,1999(2):579-583.
[28]	Pérez-Prado M T;Del Valle J A;Ruano O A .Grain refinement of Mg-A1-Zn alloys via accumulative roll bonding[J].Scripta Materialia,2004,51:1093-1097.
[29]	M. Karlfk;P. Homola;M. Slamova .Accumulative roll-bonding: first experience with a twin-roll cast AA8006 alloy[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2004(1/2):322-325.
[30]	Xing Z P;Kang S B;Kim H W .Softening behavior of 8011alloy produced by accumulative roll bonding process[J].Scripta Materialia,2001,45:597-604.
[31]	J.A. del Valle;M.T. Perez-Prado;O.A. Ruano .Accumulative roll bonding of a Mg-based AZ61 alloy[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2005(0):353-357.
[32]	詹美燕,李元元,陈维平,陈宛德.累积叠轧工艺对AZ31镁合金板材组织和性能的影响[J].材料工程,2008(03):22-27.
[33]	曲家惠,姚路明,王福.AZ31镁合金在不同轧制方式下的织构演变[J].轻合金加工技术,2008(08):29-32,40.
[34]	张青来,胡永学,王粒粒,孙毓蔚,周娅莉.挤压后交叉轧制的镁合金薄板组织研究[J].热加工工艺,2007(09):1-5.
[35]	刘劲松,竺晓华,郑黎,王忠堂,宋广胜,张士宏.AZ31镁合金交叉轧制塑性应变有限元模拟分析[J].轻合金加工技术,2009(02):18-20,47.
[36]	刘劲松,竺晓华,张士宏,郑黎,宋广胜,王忠堂.AZ31镁合金轧制板材退火后的组织与力学性能[J].材料热处理学报,2010(02):104-107.
[37]	张青来,卢晨,朱燕萍,丁文江,贺继泓.轧制方式对AZ31镁合金薄板组织和性能的影响[J].中国有色金属学报,2004(03):391-397.
[38]	Y. Chino;J.-S. Lee;K. Sassa .Press formability of a rolled AZ31 Mg alloy sheet with controlled texture[J].Materials Letters,2006(2):173-176.
[39]	高志 .材料[液—固]流变界面传热机理与高梯度温变成型界面的建立[D].中南大学,2001.
[40]	Poaer I .Partners put the squeeze on thin-sheet magnesium costs[J].Light Metals News,2003,17(04):1.
[41]	New production-ready magnesium sheet[J].Materials AUSTRALIA,2003(6):11-0.
[42]	Engl B.Future aspects of magnesium sheet materials using a new production technology[A].Berlin,Germany,2005:27-34.

上一张下一张

计量

下载量()
访问量()

作者相关

文章评分

您的评分：
1

0%
2

0%
3

0%
4

0%
5

0%

材料期刊网