欢迎登录材料期刊网

材料期刊网

高级检索

分析了以普碳钢成分生产的超细晶粒钢的显微组织.结果表明:工业生产的超细晶粒钢的显微组织由铁素体和珠光体组成,铁素体的晶粒尺寸为4~5 μm,组织中珠光体所占体积分数较低.珠光体中渗碳体以短棒状或颗粒状存在,细小的铁素体晶粒使晶粒内的位错塞积密度减少,有利于提高钢的强度和韧性.

参考文献

[1] Montemarano T W .High Strength Low Alloy Steels in Naval Construction[J].Journal of Ship Production,1986,2(03):145-162.
[2] Yada H;Matsumura Y.A New Thermomechanical Heat Treatment for Grain Refining in Low Carbon Steels[A].ISIJ,Tokyo,1988:200.
[3] P.D.Hodgson;M.R.Hickson;R.K.Gibbs .ULTRAFINE FERRITE IN LOW CARBON STEEL[J].Scripta materialia,1999(10):1179-1184.
[4] Beynon J H;Gloss R;Hodgson P D.The Production of Ultrafine Equiaxed Ferrite in A Low Carbon Steels Microalloyed Steel by Thermomechanical[A].,1992:37-42.
[5] Hurley P J;Hodgson P D.Analysis and Characterisation of Ultra-fine Ferrite Producced during A New Steel Ship Rolling Process[A].,1999:433-438.
[6] P.D.Hodgson;M.R.Hickson .The production and mechanical properties of ultrafine ferrite[J].Materials Science Forum,1998(0):63-72.
[7] Choo Wung-yong.Present developing status of high performance steel in korea(HIPERS-21 Project)[A].北京,2001:16-26.
[8] Inoue T;Torizuka S;Nagai K.Effect of Plastic Strain on Grain Size of Ferrite Transformed from Deformed Austenite in Si-Mn Steel[A].物质材料研究机构,平成13年度:45-53.
[9] 雍歧龙;马鸣图;吴宝榕.微合金钢-物理与力学冶金[M].北京:机械工业出版社,1989:57-59,104.
上一张 下一张
上一张 下一张
计量
  • 下载量()
  • 访问量()
文章评分
  • 您的评分:
  • 1
    0%
  • 2
    0%
  • 3
    0%
  • 4
    0%
  • 5
    0%