普通合金铸铁轧辊硬度低、耐磨性差;硬质合金轧辊尽管具有优异的耐磨性,但成本高,且脆性大,使用中易开裂和剥落.采用离心铸造方法,开发了耐磨性能优良的原位合成颗粒增强钢基复合材料轧辊,并着重解决了离心铸造复合材料轧辊生产过程中易偏析和产生裂纹的难题.原位合成颗粒增强钢基复合材料轧辊硬度(HRC)达66～68,辊面硬度(HRC)差小于2,冲击韧性大于18 J/cm2.用于高速线材轧机预精轧机机组,使用寿命比合金铸铁轧辊提高8～10倍,接近硬质合金轧辊水平.
参考文献
| [1] | K. Aldas;M.D. Mat .Experimental and theoretical analysis of particle distribution in particulate metal matrix composites[J].Journal of Materials Processing Technology,2005(3):289-295. |
| [2] | Zhou CW;Yang W;Fang DN .Mesofracture of metal matrix composites reinforced by particles of large volume fraction[J].Theoretical and Applied Fracture Mechanics,2004(1/3):311-326. |
| [3] | 冯培忠,强颖怀.离心铸造WC颗粒增强钢基复合材料辊环的研制[J].轧钢,2004(04):14-16. |
| [4] | HITACHI METALS LTD .Wear Resistant Centrifugal Casting Roll for Hot Rolling Mill[P].JP:2002282909-A,2001. |
| [5] | K. I. PARASHIVAMURTHY;R. K. KUMAR;S. SEETHARAMU;M. N. CHANDRASEKHARAIAH .Review on TiC reinforced steel composites[J].Journal of Materials Science,2001(18):4519-4530. |
| [6] | Das K.;Bandyopadhyay TK.;Das S. .A Review on the various synthesis routes of TiC reinforced ferrous based composites[J].Journal of Materials Science,2002(18):3881-3892. |
| [7] | Hoyle G.High Speed Steels[M].London:Butterworth and Co.Ltd,1988:42-55. |
| [8] | 刘贵立,张国英,李荣德.Electronic Theoretical Study of the Interaction between Rare Earth Elements and Impurities at Grain Boundaries in Steel[J].稀土学报(英文版),2003(03):372-374. |
| [9] | Lan Jie;He Junjie;Ding Wenjiang;Wang Qudong Zhu Yanping .Effect of rare earth Metals on the Microstructure and Impact Toughness of a Cast 0.4C-5Cr-1.2Mo-1.0V steel[J].ISIJ International,2000,40(12):1275-1282. |
| [10] | 陈金城.铸造手册[M].北京:机械工业出版社,1994:681-689. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%