以乙炔为气源,用等离子体基脉冲偏压沉积(plasma based pulsd bias deposition缩写PBPBD)技术进行了不同负脉冲偏压条件下制备DLC膜的试验.通过X射线光电子谱(XPS)、激光喇曼光谱[Raman]以及电阻分析方法考察了负脉冲偏压幅值对DLC膜化学结构的影响.结果表明由-50 kV到-10 kV随负脉冲偏压降低,DLC膜中SP3键分数单调增加,但当脉冲偏压为0时形成高电阻的类聚合物膜,说明荷能离子的轰击作用是形成DLC化学结构的必要条件.键角混乱度和SP2簇团尺寸与脉冲偏压之间不具有单调关系,在中等幅值负脉冲偏压条件下,键角混乱度较大且SP2簇团尺寸细小.
参考文献
[1] | Robertson J .Properties of diamond-like carbon[J].Surface and Coatings Technology,1992,50(03):185-203. |
[2] | 夏立芳,李光.PBII固体润滑膜的结构及真空摩擦性能[J].哈尔滨工业大学学报,2001(04):481-484. |
[3] | 孙明仁;夏立芳;孙跃 等.用等离子体基脉冲偏压技术制备DLC膜[J].材料研究学报,1999,13(05):532-534. |
[4] | 孙明仁;夏立芳;孙跃 等.Ti→C→DLC梯度复合膜及其摩擦性能[J].材料科学与工艺,1999,7(01):17-21. |
[5] | TENG E;JIAA C;ELTOUKHY A .Diamond-like carbon overcoat for magnetic thin film recording disks[J].Surface and Coatings Technology,1994,68-69:632-637. |
[6] | HE Xiao-ming;LI Wen-zhi;LI Heng de .Structural characterization and properties Enhancement of diamond- like carbon films synthesized under low energy Ne + bombardment[J].Diamond and Related Materials,1994,3:1319-1324. |
[7] | LASCOVICH J C;GIORGI R;SCAGLIONE S .Evaluation of the SP2/SP3 ratio in amorphous carbon structure by XPS and XAES[J].Applied Surface Science,1991,47(01):17-21. |
[8] | Knight D S;WHITE W B .Characterization of diamond films by Raman spectroscopy[J].Journal of Materials Research,1989,4(02):385-392. |
[9] | CHON H;KRISHNAN K M;HOPPER C B et al.Chemical structure and physical properties of diamond-like amorphous carbon films prepared by magnetron sputtering[J].Journal of Materials Research,1990,5(11):2543-554. |
[10] | Y. Taki;O. Takai .XPS structural characterization of hydrogenated amorphous carbon thin films prepared by shielded arc ion plating[J].Thin Solid Films: An International Journal on the Science and Technology of Thin and Thick Films,1998(1/2):45-50. |
[11] | Lee H J;ZUBECK R;HOLLARS D et al.Materials properties and tribological performance of hydrogenated sputter carbon overcoat on rigid disk[J].Journal of Vacuum Science and Technology A,1993,A11(06):3007-3013. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分:
-
10%
-
20%
-
30%
-
40%
-
50%