为了提高钛合金的干滑动磨损耐磨性能,以Ti-Si-Ni混合合金粉末为原料对BT9钛合金进行激光熔敷处理,制备出以金属间化合物Ti5Si3为耐磨增强相的快速凝固"原位"耐磨复合涂层,利用金相、SEM、XBD等技术分析了涂层的成分及显微组织结构,在室温干滑动磨损试验条件下测试了涂层的耐磨性.结果表明:涂层中Ti5Si3初生相均匀分布于NiTi2-β-Ti5Si3共晶基体上,整个涂层组织均匀、致密、无气孔、无裂纹;涂层与钛合金基材形成了良好的冶金结合,涂层具有很高的硬度,在室温干滑动磨损试验条件下具有优异的耐磨性能.
参考文献
| [1] | HAKRAVARTY S;ANDREWS R G;PATNAIK P C et al.The effect of surface modification on fretting fa tigue in alloy turbine components[J].Journal of The Minerals,Metals & Materials Society,1995,4:31-35. |
| [2] | B. S. Yilbas;S. Z. Shuja .Laser treatment and PVD TiN coating of TI-6Al-4V alloy[J].Surface & Coatings Technology,2000(2/3):152-157. |
| [3] | Bell T;DONG H.Tribological Enhancement of Titanium Alloys[A].北京:清华大学出版社,1998:421-427. |
| [4] | Wang H M.Laser surface alloying of Ti -6Al -4V al loy for tribological properties[J].Acta Metallurgica Sinica,1999 |
| [5] | Jiang P;ZHANG J J;Yu L G et al.Laser surface alloying of titanium alloy for tribological properties, in:[A].Proc of SPIE[C]. [s l] :[s n],2000,3888:334-338. |
| [6] | Manna I;Weisheit A;Mordike BL;Dutta Majumdar J .Laser surface alloying of Ti with Si, Al and Si+Al for an improved oxidation resistance[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1999(1/2):123-134. |
| [7] | 蒋平;张继娟;于利根 等.激光表面合金化Ti5Si3/Ti复合涂层耐磨性[J].稀有金属材料与工程,2000,29:269-272. |
| [8] | VILLARS P;PRINCE A;OKAMOTO H.Handbook of Ternary Alloy Phase Diagrams[M].,1993:13027. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%