内高压成形技术作为汽车结构件主要的减重方法,近几年得到了飞速的发展,本文介绍了该技术的主要优点以及对汽车工业的影响,对其在国内外的应用情况进行了综述.并就当前内高压技术成形的典型汽车结构件进行了较为细致的介绍,指出了未来内高压成形技术的发展趋势,将在汽车工业上得到更加广泛的应用.
参考文献
| [1] | DOHMAN F;HARTL C.Hydroforming: Research and Practical Application[A].Ohio, USA,1997 |
| [2] | Muammer Koc;Taylan Altan .An overall review of the tube hydroforming (THF) technology[J].Journal of Materials Processing Technology,2001(3):384-393. |
| [3] | KLEINERM;HOMBERG W;BROSIUS A .Process and control of sheet metal hydroforming[J].Advanced Technology of Plasticity,1999,2(06):1243-1252. |
| [4] | SCHMOECKELD;HIELSCHER C;PRIER M.Developments and perspectives of internal high - pressure forming of hollow sections[J].Advanced Technology of Plasticity,1999(02):61171-1182. |
| [5] | 苑世剑.内高压成形技术现状与发展趋势[J].金属成形工艺,2003(03):1-3. |
| [6] | MARANDORA.TubularHydroformingProcessVariables[J].Metal Forming,1998:36-40. |
| [7] | YUAN S J;LIU. G;WANG. X. S.UseofWrinklesinTubeHydroforming-IdeaandExamplesInternationalConferenceonHydroforming[J].Sttugart Germany,2003:79-90. |
| [8] | 苑世剑,王仲仁.内高压成形的应用进展[J].中国机械工程,2002(09):783-786. |
| [9] | KLAAS F.Innovations in high- pressure hydroforming[A].Ohio, USA,1997 |
| [10] | YUANS J;LIU G. Z;WANG, R.Hydroforming of Rectangular- section Structural Components with Relatively Lower Pressure[M].Proceedings of the TUBEHYDRO 2003 Nagoya[C] Japan,2003:13-17. |
| [11] | MASAMITSU SUETAKE.Development of tube hydroforming with intelligent process control system[A].Japan,2003:73-77. |
| [12] | 苏岚,王先进,唐荻,范光尧.T型管液压成形过程的有限元分析[J].北京科技大学学报,2002(05):537-540. |
| [13] | 赵长财,周磊,张庆.薄壁管液压胀形加载路径研究[J].中国机械工程,2003(13):1087-1089. |
| [14] | 周杰,林乔荣,曹建国.直管液压成形工艺模拟及缺陷分析[J].锻压技术,2004(02):39-40,72. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%