为了研究正挤压加工对SiCw/6061Al复合材料晶须形貌的影响规律,通过改变挤压温度、挤压比等工艺条件正挤压成形了挤压铸造法制备的15vol.%SiCw/6061Al复合材料,利用SEM技术观察和分析了正挤压加工前后复合材料的微观组织形貌.研究表明:正挤压加工导致SiC晶须沿着复合材料的塑性流动方向呈现出一定程度的定向排列趋势,并伴随有比较明显的折断现象;挤压温度、挤压比等工艺参数都是影响SiC晶须形貌的主要因素.
参考文献
| [1] | Zhang Libin;Hai Jintao .Metal matrix composites in china[J].Journal of Materials Processing Technology,1998(1/3):1-5. |
| [2] | JIM C;CHANG I.Aerospace materials and structural research into the next millennium[A].,1997:134-142. |
| [3] | WILLIAMCHJ .Commercialprocessingofmetalmatrixcomposites[J].Materials Science and Engineering,1998,244:75-79. |
| [4] | Hirokuni Yamamoto;Hisashi Nishimura;Akihiro Miyazaki .Formability of superplastic aluminum alloy composites reinforced with SiC particles[J].Journal of Materials Processing Technology,2000(1/3):198-208. |
| [5] | 李建辉,李春峰,雷廷权.金属基复合材料成形加工研究进展[J].材料科学与工艺,2002(02):207-212. |
| [6] | GENG L;HU J Q;LIU B.High temperature compressive deformation behavior of SiCw/6061 Al composite at liquid- solid dual phase zone[A].,1997:550-555. |
| [7] | TONGGQ;CHANG K C .DeformationbehaviorofaPMAl6013/15SiCpCompositessheetatelevatedtemperature[J].Materials Letters,1999,38:326-330. |
| [8] | 赵敏,严峰,吴昆.SiCw/MB15镁基复合材料超塑性变形空洞行为[J].材料科学与工艺,2003(04):403-405. |
| [9] | K. C. Chan;B. Q. Han .High-strain-rate superplasticity of particulate reinforced aluminium matrix composites[J].International Journal of Mechanical Sciences,1998(2/3):305-311. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%