为了提高注塑内应力计算的可靠性,利用粘弹性力学理论建立了新的注塑制品内应力计算的四元件串联力学模型,并推导了其瞬态粘弹性响应的非线性本构方程.通过求解流动及保压控制方程,得到内应力计算所需的温度场和压力场,利用回归分析得到了聚合物弹性模量和粘壶系数的计算公式.用新模型对PS平板注塑制件脱模前的内应力进行了模拟计算.计算结果与固体高聚物的结构和力学性能的相关研究结论相一致.
参考文献
| [1] | BAAIJENS F P T .Calculation of residual stress in injection molded products[J].Rheologica Acta,1991,30(03):284-299. |
| [2] | CHIANG H H;HIEBER C A;WANG K K .A unified simulation of the filling and post-filling stages in injection molding.Part Ⅰ.Formation[J].Polymer Engineering and Science,1991,31(02):116-117. |
| [3] | ZOETELIEF W F;DOUVEN L FA;INGEN HOUSZ A J .Residual thermal stresses in injection moulded products[J].Polymer Engineering and Science,1996,36(14):1886-1896. |
| [4] | LIU Shihjung .Modeling and simulation of thermally induced stress and warpage in injection molded thermoplastics[J].Polymer Engineering and Science,1996,36(06):807-818. |
| [5] | WARD I W;徐懋.固体高聚物的力学性能[M].北京:科学出版社,1988 |
| [6] | HEARLE Von J W S.Polymers and Their Properties.Vol.1.Fundamentals of Structure and Mechanics[M].Chichester:Ellis Horwood Lid,1982 |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%