为了研究变径管内高压成形过程中工艺参数和管坯几何尺寸对壁厚分布的影响,通过力学分析和全量本构方程,推导出变径管内高压成形厚度分界圆的解析公式.该公式反映了摩擦系数、膨胀系数、管端轴向应力与内压之比、送料区相对长度、管坯相对壁厚、零件过渡锥角等参数与厚度分界圆相对位置之间的定量关系,并与数值模拟规律一致.研究表明:随着摩擦系数、管端轴向应力与内压之比、送料区相对长度的增加,壁厚不变的厚度分界圆距离管端越来越近,即膨胀区壁厚减薄区域是越来越大的;而随着管坯相对壁厚的增加,壁厚不变的厚度分界圆距离管端越来越远,即膨胀区壁厚减薄区域是越来越小的.
参考文献
| [1] | 苑世剑,王仲仁.内高压成形的应用进展[J].中国机械工程,2002(09):783-786. |
| [2] | 苑世剑.内高压成形技术现状与发展趋势[J].金属成形工艺,2003(03):1-3. |
| [3] | TIROSH J;NEUBERGE A;SHIRIZLY A .On tube expansion by internal fluid pressure with additional compressive stress[J].International Journal of Mechanical Sciences,1996,38(7-8):839-851. |
| [4] | YUAN S J;YUAN W J;WANG Z R.Numerical simulation of hydroforming a double conical tube[A].Detroit:AMER INST PHYSICS,2005:595-600. |
| [5] | DOHMANN F;BOHM A;DUDZIAK K U.The shaping of hollow shaped workpieces by liquid bulge forming[A].北京:万国学术出版社,1993:447-452. |
| [6] | DOHMANN F;HARTL C .Hydorforming-a method to manufacture light-weight parts[J].Journal of Materials Processing Technology,1996,60:669-676. |
| [7] | Ken-ichi Manabe;Masaaki Amino .Effects of process parameters and material properties on deformation process in tube hydroforming[J].Journal of Materials Processing Technology,2002(2):285-291. |
| [8] | YUAN S J;LIU G;WANG X S.Use of wrinkles in tube hydroforming-idea and examples[A].Germany:MAT INFO Werkstoff-Informationsgesellschaft,2003:79-90. |
| [9] | YUAN S J;LIU G;WANG X S et al.Control and use wrinkles in tube hydroforming[J].Journal of Materials Processing Technology,2007,182:6-11. |
| [10] | S.J. Yuan;G. Liu;X.R. Huang .Hydroforming of typical hollow components[J].Journal of Materials Processing Technology,2004(1/3):203-207. |
| [11] | Lihui Lang;Shijian Yuan;Xiaosong Wang .A study on numerical simulation of hydroforming of aluminum alloy tube[J].Journal of Materials Processing Technology,2004(3):377-388. |
| [12] | 王小松,苑世剑,王仲仁.内高压成形起皱行为的研究[J].金属学报,2003(12):1276-1280. |
| [13] | YUAN S J;LIU G;LANG L H .Numerical Simulation of wrinkling in hydroforming of aluminum alloy tubes[J].Transactions of Nonferrous Metals Society of China,2003,13:152-156. |
| [14] | VOLLERTSEN F;PLANCAK M .On possibilities for the determination of the coefficient of friction in hydrofroming of tubes[J].Journal of Materials Processing Technology,2002,125-126:412-420. |
| [15] | GROCHE P;PETER A.Performance of lubrication in internal high pressure forming of tubes[A].Yokohama:Japan Societr for Technology of Plasticity,2002:1477-1482. |
| [16] | DOHMANN F;HARTL C .Tube hydroforming-research and practical application[J].Journal of Materials Processing Technology,1997,71:174-186. |
| [17] | DOHMANN F.Introduction to the processes of hydroforming[A].Germany:MAT INFO Werkstoff-Informationsgesellschaft,1999:1-21. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%