在气动式间接杆杆型冲击拉伸试验机上对二种TRIP钢的拉伸性能随应变率的变化进行了研究,对强度随应变率的变化以及断口形貌和孔洞与变形的关系进行了分析.研究结果表明:TRIP钢在所研究的应变率范围对应变率是敏感的,屈服强度和抗拉强度随应变率增加明显提高.SEM分析发现,TRIP钢断口体现为典型的延性断裂特征,而且残余奥氏体的变形诱发相变对孔洞形成位置的影响使得其具有较好的延性.
参考文献
| [1] | MATSUMURA O;SAKUMA Y;TAKECHI H .Enhancement of elongation by retained austenite in intercritical annealed 0,4C-1,5Si-0,8Mn steel[J].Trans ISU,1987,27:570-579. |
| [2] | A. Pichier and P. Stiaszny .TRIP steel with reduced silicon content[J].Steel Research,1999(11):459-465. |
| [3] | JACQUES P;CORNET X;HARLET Ph;Ladriere J Delannay F .Enhancement of the mechanical properties of a low-carbon,low-sillicon steel by formation of a multiphased mierostrueture containing retained austenite[J].Metallurgical & Materials Transactions A:Physical Metallurgy & Materials Science,1998,29:2383-2393. |
| [4] | SAKUMA Y;MATLOCK D K;KRAUSS G .Intereritical annealed and isothermally transformed 0,15pct C steels containing 1,2 pet Si-1,5 pet Mn and 4 pet Ni:Part II.Effect of testing temperature on stress-strain behavior and deformation-induced austenite transforlnation[J].Metallurgical & Materials Transactions A:Physical Metallurgy & Materials Science,1992,23:1233-1241. |
| [5] | TSUKATANI I;HASHIMOTO S;INOUET .Effects of silicon and inanganege addition on mechanical properties of high-strength hot-rolled sheet steel containing retained austenite[J].ISU International,1991,31(09):992-1000. |
| [6] | Koh-ichi SUGIMOTO .Effects of Retained Austenite Parameters on Warm Stretch-flangeability in TRIP-aided Dual-phase Sheet Steels[J].ISIJ International,1999(1):56-63. |
| [7] | T. MINOTE;S. TORIZUKA;A. OGAWA;M. NIIKURA .Modeling of Transformation Behavior and Compositional Partitioning in TRIP Steel[J].ISIJ International,1996(2):201-207. |
| [8] | Bleck W.;Schael I. .Determination of crash-relevant material parameters by dynamic tensile tests[J].Steel Research,2000(5):173-178. |
| [9] | Prosehe Engineering Services,Inc .ULSAB-AVC Reports:Third Part-Strain Rate Dependent Material Properties in CAE Analysis for Crashworthiness[R].,2002. |
| [10] | GIRAULT E;JACQUES P;HARLET P h et al.Metallographic methods for revealing the muhiphase microstructure of TRIP-assisted steels[J].Materials Characterization,1998,40:111-118. |
| [11] | ZHOU Y X;XIA Y M .Tensile mechanical behavior of TiAl(FL)at hish strain rate[J].J Mat Sci of ASME,2000,34:925-929. |
| [12] | DI CHIRO A;ROOT J H;YUE S.Processing and properties of a Si-Mn Nb-bearing TRIP steel for use in fasteners[A].,1996:373-382. |
| [13] | HARDING J.The effectofhiSh-strain rate on material properties[A].Elsevier applied science publishers Ltd,1987:133-186. |
| [14] | L.E.MURR.Metallurgical effects of shock and high -strain rate loading[A].Elsevier applied science publishers Ltd,1987:1-46. |
| [15] | BACKOFEN W A;AVERY I R .Super-plasticity in an Al-Zn alloy[J].Trana ASM,1964,57(06):980-990. |
| [16] | 宋玉泉,程永春,王习文.拉伸变形应变速率敏感性指数的力学涵义及其规范测量[J].机械工程学报,2000(08):33-38. |
| [17] | 李世春.Zn-Al共晶合金的超塑性[M].东营:中国石油大学出版社,1998 |
| [18] | WEI X C;LI L;FU R Y.Influence of strain rate on strain-induced transformation of retained austenite to martensite in high strength low alloy TRIP steel[A].,2002:373-378. |
| [19] | 马鸣图;吴宝榕.双相钢一物理和力学冶金[M].北京:冶金工业出版社,1988 |
| [20] | WEI Xi-Cheng;LI Lin;Fu Ren-Yu;Shi Wen.On the tensile mechanical properties of Si-Mn TRIP steels at hish strain rate[J].Aeta Metalhrgiea Sinica,2002(03):285-294. |
| [21] | TSUKATANI I;HASHIMOTO S;INOUE I .Effects of silicon and manganese addition on mechanical properties of high-strength hot-wiled sheet steel containing retained austenite[J].ISIJ International,1991,31(09):992-1000. |
| [22] | SINHA K.Ferrous Physical Metallurgy[M].London:Butterworths,1989:324. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%