针对裂纹敏感性钢种的凝固特点,论述了裂纹敏感性钢种连铸用保护渣控制传热性能、熔化性与铺展性、润滑铸坯的能力以及吸收夹杂的能力等性能要求;总结了裂纹敏感性钢种连铸用保护渣的渣膜传热机理、结晶性能以及渣膜结构方面的研究现状;并探讨了裂纹敏感性钢种连铸用保护渣研究的发展方向.
参考文献
| [1] | 陈宝云,袁凡城.连铸中碳钢用CK-2保护渣的研制[J].炼钢,2001(03):34-36,41. |
| [2] | 莫德敏,张雅丽,王怀宇.结晶器保护渣的临界温度以及与连铸的关系[J].宽厚板,2002(04):40-43. |
| [3] | 袁伟霞.连铸板坯纵裂纹综述[J].炼钢,1997(05):47-50. |
| [4] | 汪洪峰,姜加和,江中块.包晶钢连铸板坯表面质量的控制[J].冶金丛刊,2004(02):1-2,5. |
| [5] | 张正祥;王毅驹.连铸结晶器保护渣的应用试验[J].炼钢,1994(05):12-17. |
| [6] | 迟景灏;甘永年.连铸保护渣[M].沈阳:东北大学出版社,1992:5-6. |
| [7] | Jungwook Cho .Radiative Heat Transfer through Mold Flux Film during Initial Solidification in Continuous Casting of Steel[J].ISIJ International,1998(3):268-275. |
| [8] | K Watanbe.中碳钢高速连铸结晶器保护渣的改进[J].武钢技术,1997(06):20-22. |
| [9] | 成泽伟,陈伟庆,李联生,于平,姚家华.保护渣性能对结晶器内传热的影响[J].北京科技大学学报,2003(06):524-527. |
| [10] | 朱传运,李春龙,王云盛,刘承军,王德永,史培阳,姜茂发.中碳钢板坯连铸保护渣的结晶性能[J].钢铁研究学报,2004(03):19-22. |
| [11] | 刘明华,刘正,王海川.连铸坯表面凹陷和纵裂分析[J].炼钢,2000(06):55-58. |
| [12] | H Shibata.[A].Sydney,Australia,1997:771-776. |
| [13] | S E Royzman .Coefficient of friction between strand and mould during continuous casting:mathematical model[J].Ironmaking and Steelmaking,1997,24(06):484-490. |
| [14] | P Scheller.[A].Madrid,1998:797-803. |
| [15] | Jimbo.Some Aspects of Chemical Phenomena in the Mold of a Continuous Slab Caster[A].,1991:117-134. |
| [16] | C A Pinheiro et al.Mold Flux for CC of Steel[J].Ironmaking and Steelmaking,1995,22(02):37-39. |
| [17] | K C Mills.Heat Transfer Through Infiltrated Slag Layer[A].ISS,USA:157-162. |
| [18] | A C Mikrovas et al.Heat Transfer Characteristics of Molten Slag[J].Ironmaking and Steelmaking,1991,18(03):169. |
| [19] | Cho,Jung Wook Heat Transfer Across Mold Flux Film in Mold during Initial Solidification in Continuous Casting of Steel[J].ISIJ International,1998,38(08):834-842. |
| [20] | M Susa;K C Mills .Thermal Properties of Slag Films Taken from Continuous Casting Mould[J].Ironmaking and Steelmaking,1994,21(04):279. |
| [21] | K Watanabe.Development of Mold Powder for High Speed Casting of Middle Carbon Steel[A].,1996:265-268. |
| [22] | P Grieveson et al.Physical Properties of Casting Powders:Part 2Mineralogical Constitution of Slags Formed by Powders[J].Ironmaking and Steelmaking,1998,15(04):181-186. |
| [23] | R Taylor;K C Mills.Physical Properties of Casting Powders:Part 3.Thermal Conductivities of Casting Powders[J].Ironmaking and Steelmaking,1988(15):187-194. |
| [24] | K Kondo et al.[J].CAMP-ISIJ,1995,81:165. |
| [25] | J.Cho .Thermal Resistance at the Interface between Mold Flux Film and Mold for Continuous Casting of Steels[J].ISIJ International,1998(5):440-446. |
| [26] | I R Lee.Development of Mould Powder for High Speed Continuous Casting[A].北京,1993:23-29. |
| [27] | 卢盛意.连铸坯质量[M].北京:冶金工业出版社,2000:214-223. |
| [28] | 王谦,王雨,迟景灏,谢兵,何宇明,朱斌,屈毅,孙毅杰.连铸保护渣结晶性能与16Mn铸坯表面微裂纹的关系[J].钢铁,2003(04):24-26. |
| [29] | K C Mills.The Making,Shaping and Treating of Steel[A].The AISE Steel Foundation,2003:9-13. |
| [30] | 薛里辉 .GeO2-PbO-ZnO红外玻璃的Raman光谱和结构[J].光散射学报,1999,11(03):269-273. |
| [31] | 徐建 .多组分碲卤基红外玻璃的研究[J].硅酸盐学报,1997,25(03):301-304. |
| [32] | 谢兵 .连铸结晶器保护渣相关基础理论的研究及其应用实践[D].重庆大学,2004. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%