以7xxx系列高强铝合金为主,简述了Al合金的应力腐蚀机理,重点讨论了影响应力腐蚀开裂的主要因素,同时介绍了几种新的SCC试验的研究方法,并指出进一步研究SCC理论对提高铝合金的抗应力腐蚀性能有重要意义.
参考文献
| [1] | Speidel M O.The theory of Stress Corrosion Cracking in Alloys[M].,1971:289-344. |
| [2] | Song RG;Dietzel W;Zhang BJ;Liu WJ;Tseng MK;Atrens A .Stress corrosion cracking and hydrogen embrittlement of an Al-Zn-Mg-Cu alloy[J].Acta materialia,2004(16):4727-4743. |
| [3] | Caechowski M.Stress Corrosion cracking of aluminium alloy and their welded joints[A].Poland:Krakow,2002:17-21. |
| [4] | M. J. Starink;S. C. Wang .A model for the yield strength of overaged Al-Zn-Mg-Cu alloys[J].Acta materialia,2003(17):5131-5150. |
| [5] | Viswandham R K;Sun T S .The Mg-H composite theory of stress corrosion cracking in aluminium alloys[J].Metallurgical and Materials Transactions,1980,11A(06):85-89. |
| [6] | Gruhl W;MetsUkd Z .Stress corrosion cracking of high strength aluminium alloys[J].Materials Science and Engineering,1984,75(01):819-826. |
| [7] | Puiggali M;Zielinski A .Effect of microstructure on stress corrosion cracking of an AlZnMgCu alloy[J].Corrosion Science,1998,40(46):805-819. |
| [8] | Scanmans G M;Holmyd N J H;Tuck C D S .The mechanism of magnesium segregation in the intergranular stress corrosion cracking of aluminium alloys[J].Corrosion Science,1987,27(04):329-347. |
| [9] | 任广军,赵春英.铝合金应力腐蚀裂纹内的电化学行为[J].沈阳工业学院学报,2002(02):110-113. |
| [10] | 刘继华,李荻,朱国伟,刘培英.7075铝合金应力腐蚀敏感性的SSRT和电化学测试研究[J].腐蚀与防护,2005(01):6-9. |
| [11] | Tsai T C;Chuang T H .Stress corrosion cracking of superplsstically formed 7475 aluminum alloy[J].Metallurgical and Materials Transactions,1996,28A(10):2113-2121. |
| [12] | 刘继华,李荻,刘培英,郭宝兰,朱国伟.时效和回归处理对7075铝合金力学及腐蚀性能的影响[J].材料热处理学报,2002(01):50-53. |
| [13] | Kanno M;Araki L .Precipitation behavior of 7000 alloys during retrogression and reaging treatment[J].Journal of Materials Science and Technology,1994,10(06):599-603. |
| [14] | Park J K;Ardell A J .Mierochemical analysis of precipitate free zones in 7075-Al in the T6,T7 and RRA tempers[J].Acta Materials,1991,39(04):591-598. |
| [15] | 张坤,刘志义,郑青春,许晓嫦,叶呈武.高Zn超高强铝合金的回归再时效处理[J].中南大学学报（自然科学版）,2005(02):188-192. |
| [16] | M O Speidel.Stress corrosion cracking of aluminum alloys[J].Matallurgical Transactions,1975(6A):631-642. |
| [17] | 程勇胜,郑子樵,李秋菊.时效制度对7475铝合金组织与性能的影响[J].轻合金加工技术,2001(06):40-44,37. |
| [18] | 孙志华,刘明辉,张晓云,高健,陆峰,汝继刚.时效制度对Al-Zn-Mg-Cu铝合金应力腐蚀敏感性的影响[J].中国腐蚀与防护学报,2006(04):232-236. |
| [19] | 杜平.7B04铝合金断裂韧性研究[J].有色金属加工,2006(01):9-11,14. |
| [20] | Jing-Chie Lin;Hsueh-Lung Liao;Wern-Dare Jehng;Chih-Horng Chang;Sheng-Long Lee .Effect of heat treatments on the tensile strength and SCC-resistance of AA7050 in an alkaline saline solution[J].Corrosion Science: The Journal on Environmental Degradation of Materials and its Control,2006(10):3139-3156. |
| [21] | Yang J G;Ou B L .Influence of microstructure on mechanical properties and stress corrosion susceptibility of 7075 Al-alloy[J].Scandinavian Journal of Metallurgy,2001,30:158-167. |
| [22] | A.F. Oliveira Jr.;M.C. de Barros;K.R. Cardoso .The effect of RRA on the strength and SCC resistance on AA7050 and AA7150 aluminium alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2004(1/2):321-326. |
| [23] | 郑子樵,李红英,莫志民.一种7055型铝合金的RRA处理[J].中国有色金属学报,2001(05):771-776. |
| [24] | 陈康华,黄兰萍.Strengthening-toughening of 7xxx series high strength aluminum alloys by heat treatment[J].中国有色金属学会会刊(英文版),2003(03):484-490. |
| [25] | 张茁,陈康华,刘红卫,李松,黄兰萍.高温预析出对7055铝合金强度、塑性和应力腐蚀抗力的影响[J].铝加工,2003(02):10-14. |
| [26] | 郑强,陈康华,黄兰萍,胡化文.高温预析出和固溶温度对7A52合金应力腐蚀开裂的影响[J].金属热处理,2005(07):14-17. |
| [27] | 陈康华,张茁,刘红卫,李松,黄兰萍.近固溶度高温析出对7055铝合金时效强化和应力腐蚀的影响[J].中南工业大学学报(自然科学版),2003(02):114-118. |
| [28] | 张茁,陈康华,刘红卫,李松,黄兰萍.高温预析出对Al-Zn-Mg-Cu铝合金显微组织、强度和应力腐蚀抗力的影响[J].金属热处理,2003(07):13-16. |
| [29] | LI Song;CHEN Kang-hua;LIU Hong-wei;HUANG Lan-ping;ZHANG Zhuo .Effect of high-temperature pre-precipitation on mechanical properties and stress corrosion cracking of Al-Zn-Mg alloys[J].Transactions of Nonferrous Metals Society of China,2003(3):585-589. |
| [30] | Sompsan D S;洪永先.国外近代变形铝合金专集[M].北京:冶金工业出版社,1987 |
| [31] | Jones R H;Gertsman V Y;Vetrano J S;ct al .Crack-particle interactions during intergranular stress corrosion of AA5083 as observed by cross-section transmission electron micreseepy[J].Scripta Materialia,2004,50:1355-1359. |
| [32] | 李久青.铝合金稀土转化膜处理对LC4合金耐SCC性能的影响[J].腐蚀科学与防护技术,1996(02):139. |
| [33] | 李久青.铝合金表面四价铈盐转化膜及其耐蚀性[J].腐蚀科学与防护技术,1996(04):271. |
| [34] | Yu X W;Cao C N;Yao Z M et al.Corrosion behavior of rare earth metal (REM) conversion coatings on aluminum alloy LY12[J].Materials Science and Engineering,2000,A284:56-63. |
| [35] | Yue TM;Yan LJ;Chan CP .Stress corrosion cracking behavior of Nd : YAG laser-treated aluminum alloy 7075[J].Applied Surface Science: A Journal Devoted to the Properties of Interfaces in Relation to the Synthesis and Behaviour of Materials,2006(14):5026-5034. |
| [36] | Lin J H;Li D;Guo B A et al.Slow strain rate tension test of high-strength aluminum alloy 7075[J].Journal of Materials Science and Technology,2001,1:37-40. |
| [37] | Senkov O N;Miracle D B .Low temperature mechanical properties of seandium modified Al-Zn-Mg-Cu alloys[J].Materials Science Forum,2002,396-402:1127-1129. |
| [38] | L. L. Rokhlin;T. V. Dobatkina;N. R. Bochvar .Investigation of phase equilibria in alloys of the Al-Zn-Mg-Cu-Zr-Sc system[J].Journal of Alloys and Compounds: An Interdisciplinary Journal of Materials Science and Solid-state Chemistry and Physics,2004(1/2):10-16. |
| [39] | 戴晓元,夏长清,刘昌斌.微量钪对Al-Zn-Mg-Cu-Zr铝合金组织与性能的影响[J].矿冶工程,2004(03):59-61,63. |
| [40] | A.V. Sameljuk;O.D. Neikov;A.V. Krajnikov;Yu.V. Milman;G.E. Thompson .Corrosion behaviour of powder metallurgical and cast Al-Zn-Mg base alloys[J].Corrosion Science,2004(1):147-158. |
| [41] | Wu Y L;Floes F H .Effects of microalloying with Sc,Ni and Ccon behavior of ingot alumimum alloy process[J].Lightweight Met Mater Ⅱ,1997,9(02):73-81. |
| [42] | Winkler S L;Flower H M .Stress corrosion cracking of cast 7xxx aluminium fibre reinforced composites[J].Corrosion Science,2004,46:903-915. |
| [43] | Chang CH;Lee SL;Lin JC;Yeh MS;Jeng RR .Effect of Ag content and heat treatment on the stress corrosion cracking of Al-4.6Cu-0.3Mg alloy[J].Materials Chemistry and Physics,2005(2/3):454-462. |
| [44] | 陈大钦,郑子樵,李世晨,陈志国.Mechanism of stress aging in Al-Cu(-Mg-Ag) alloys[J].中国有色金属学会会刊(英文版),2004(04):779-784. |
| [45] | 左景伊.应力腐蚀破裂[M].西安:西安交通大学出版社,1989 |
| [46] | T.C. Tsai;T.H. Chuang .Technical Note: Relationship Between Electrical Conductivity and Stress Corrosion Cracking Susceptibility of Al 7075 and Al 7475 Alloys[J].Corrosion: The Journal of Science and Engineering,1996(6):414-416. |
| [47] | Holroyd N J H;Hardie D .Factors controlling crack velocity in 7000 series aluminium alloys during fatigue in an aggressive environment[J].Corrosion Science,1983,23(06):527-531. |
| [48] | A.D.B.Gingell;J.E.Eing .The Effect of Frequency and Microstructure on Corrosion Fatigue Crack Propagation in high Strength Aluminium Alloys[J].Acta materialia,1997(9):3855-3870. |
| [49] | 刘继华,朱国伟,李荻,郭宝兰,刘培英.电极极化对铝合金应力腐蚀断裂敏感性的影响[J].材料保护,2005(03):25-27. |
| [50] | Najjar D;Maguin T;Warner T J .Influence of critical surface defects and localized competition between anodic dissolution and hydrogen effects during stress corrosion cracking of 7050 aluminum alloy[J].Materials Science and Engineering,1997,A238:293-302. |
| [51] | Haruna T;Kouno T;Fujimoto S .Electrochemical conditions for environment-assisted cracking of 6061 Al alloy[J].Corrosion Science,2005,47:2441-2449. |
| [52] | Xiaodong Liu;G.S. Frankel;B. Zoofan;S.I. Rokhlin .Effect of applied tensile stress on intergranular corrosion of AA2024-T3[J].Corrosion Science,2004(2):405-425. |
| [53] | D. McNaughtan;M. Worsfold;M.J. Robinson .Corrosion product force measurements in the study of exfoliation and stress corrosion cracking in high strength aluminium alloys[J].Corrosion Science,2003(10):2377-2389. |
| [54] | Robinson M J .The role of wedging stresses in the exfoliation corrosion of high strength aluminium alloys[J].Corrosion Science,1983,23(08):887-899. |
| [55] | Hui-Ji Shi;Chunyi Ruan;Xide Li .Study on the initiation stage of stress corrosion of an aluminum alloy using the subjective speckle technique[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2006(1/2):218-224. |
| [56] | Toh SL.;Woo KC.;Tay CJ.;Shang HM.;Quan C. .Whole field surface roughness measurement by laser speckle correlation technique[J].Optics & Laser Technology,2001(6):427-434. |
| [57] | Song YZ.;Groll M.;Guo ZY.;Kulenovic R. .EFFECTS OF SPECKLE DISPLACEMENT ON SPECKLE INTERFEROMETRY FOR MEASUREMENT OF PHASE OBJECT[J].Optics Communications: A Journal Devoted to the Rapid Publication of Short Contributions in the Field of Optics and Interaction of Light with Matter,1997(1/3):24-30. |
| [58] | Kolenovic E.;Jueptner W.;Osten W. .Non-linear speckle phase changes in the image plane caused by out of plane displacement[J].Optics Communications: A Journal Devoted to the Rapid Publication of Short Contributions in the Field of Optics and Interaction of Light with Matter,1999(4):333-344. |
| [59] | Hinsch KD.;Gulker G.;Wolff K.;Fricke-Begemann T. .Speckle correlation for the analysis of random processes at rough surfaces[J].Optics and Lasers in Engineering,2000(2):87-105. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%