研究不同粉末粒度Al-9.0%Fe-1.8%Mo-1.7%Si/5%(Zn-30%Al)金属/金属复合材料的组织、拉伸性能和阻尼性能.快速凝固粉末由气体雾化制备,选取平均粒度d50分别为27.3,36.2,41.6μm粉末装入包套,经除气,再热挤压制成棒材.结果表明,粉末粒径越粗,强化相越粗大,呈团聚体存在,且有偏聚现象,材料的强度明显下降,室温下粉末较细材料的阻尼性能较好,高于100℃时粉末粒度较粗材料的阻尼性能好.
参考文献
| [1] | 田莳;李秀臣;刘正堂.金属物理性能[M].北京:航空工业出版社,1994 |
| [2] | E.J. LAVERNIA;R.J. PEREZ;J. ZHANG .Damping Behavior of Discontinuously Reinforced Al Alloy Metal-Matrix Composites[J].Metallurgical and Materials Transactions, A. Physical Metallurgy and Materials Science,1995(11):2803-2818. |
| [3] | 李沛勇;戴圣龙;刘大博.低密度高阻尼金属/金属复合材料[J].材料科学与工艺,1999(zk):91-95. |
| [4] | P.Y.Li;S.L.Dai .HIGH DAMPING Al-Fe-Mo-Si/Zn-Al COMPOSITES PRODUCED BY RAPIDLY SOLIDIFIED POWDER METALLURGY PROCESS[J].Scripta materialia,2000(10):955-960. |
| [5] | P.Y. Li;H.J. Yu;S.L. Dai .Development of High Damping Aluminum Alloys and Composites Using Rapidly Solidified Powder Metallurgy Process[J].Materials Science Forum,2003(Pt.1):411-416. |
| [6] | PEREZ P;GONALEZ-CARRASOCO J L;AdEVA P .Influence of the particle size on tensile properties of Ni3Al processed by rapid solidification and hot isostatic pressing[J].Materials Science and Engineering,1995,A199:211-218. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%