针对环氧/氰酸酯共固化体系,以液氧冲击敏感性试验作为判定聚合物与液氧相容性的基本手段,重点研究了聚合物的抗氧化和阻燃性能与其液氧相容性之间的关系,证实了聚合物抗氧化性能的增强和阻燃性能的改善可以有效提高其与液氧的相容性.这为聚合物旨在改善与液氧相容性的改性指明了方法和途径,并由此获得两个具有良好液氧相容性的聚合物体系.
参考文献
| [1] | MORINO Y;SHIMODA T;MORIMOTO T et al.Feasibility study of the cryogenic composite tank for reusable launch vehicles[R].IAF-99-I.3.06 |
| [2] | CHOU T C;FIEDOROWICZ A .Oxygen compatibility of polymers including TFE-Teflon,Kel-F 81,Vespel SP-21,Viton A-500,Flurel,Neoprene,EPDM,Buna-N,and Nylon 66[R].ASTM STP 1319,1997. |
| [3] | NEWTON B E;WILSON D B;STRADLING J S .Potential ignition mechanism of Buna-N O-Rings in liquid oxygen[R].ASTM STP 1395,2000. |
| [4] | KEY C F;RIEHL W A;George C .Compatibility of materials with liquid oxygen[R].Marshall Space Flight Center Huntsville Ala,1960. |
| [5] | HAUSER R L .Reactions of organic materials with liquid oxygen[J].Advances in Cryogenic Engineering,1963,8:242-247. |
| [6] | Flammability,order,offgassing and compatibility requirements and test procedures for materials in environments that support combustion[R].NSAS-STD-6001 |
| [7] | WRIGHT R J;ROULE G M.Large scale composite liquid oxygen feedlines for launch vehicles[A].,2000:352-359. |
| [8] | ROBINSON M J;STOLTZFUS J M;OWENS T N .Composite material compatibility with liquid oxygen and gaseous oxygen[R].AIAA-2001-1215 |
| [9] | 欧育湘;陈宇;王筱梅.阻燃高分子材料[M].北京:国防工业出版社,2001:34-45. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%