测试研究了Ti600 高温钛合金板材在不同加工及热处理状态下的室温拉伸及高温蠕变性能,分析对比了热机械处理工艺(thermomechanical process-TMP)与常规加工热处理对合金板材组织形态特征与性能的影响规律与内在机制;另外还对Ti600合金板材的焊接性能进行了研究.结果表明:采用热机械处理工艺(TMP)可获得充分生长的片层状团束组织(colony structure),这种类型的组织显著提高了合金的高温蠕变性能.而且合金经电子束焊接后仍然具有良好的综合性能.
参考文献
| [1] | BANIA PJ.An advanced titanium alloy for elevated temperature[J].Journal of Metals,1988:20-22. |
| [2] | BLENKINSOP PA .Developments in high temperature Ti alloy[J].Titanium science and technology,1984,4:2323-2338. |
| [3] | ZHANG Z Q;HONG Q.Microstructure and mechanical properties of a high temperature titanium alloy Ti-600[A].:330-334. |
| [4] | 洪权,张振祺,杨冠军,罗国珍.Ti600合金的热机械加工工艺与组织性能[J].金属学报,2002(z1):135-137. |
| [5] | 江义军.推重比12～15发动机技术途径分析[J].航空动力学报,2001(02):103-107. |
| [6] | 郭海丁,邬华芝,刘观日,高德平.TC4钛合金焊接接头疲劳损伤演变模型研究[J].航空动力学报,2003(02):206-210. |
| [7] | GORELIK S S.Recrystallization in metals and alloys[M].Moscow:MIR Publishers,1981:206-212. |
| [8] | BODYAKO N;Grodienko A l.Peculiarites of phase and structure transformations in titanium alloys in the process of high-speed electric heat treatment[A].Munich,1984:1621-1628. |
| [9] | AUST K T.The Art and Science of Growing Crystals[M].New York:Wiley,1963 |
| [10] | WEINEM D;KUMPFERT J.Mechanical properties of the near-alpha titanium alloy timetal 1100 with fine β-grain size[A].Birminham,1995:1042-1049. |
| [11] | BANIA P J;HALL J A.Creep studies of Ti-6242 alloy[J].Titanium science and technology,1985:2371. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%