通过热压缩试验研究TC4(Ti-6Al-4V)合金在应变速率为0.001～100s-1,变形温度为750～1050℃条件下的热成形性能.建立了基于流动应力的TC4合金本构方程.综合考虑应变速率和变形温度对材料微观结构及性能的影响,采用动态材料模型建立加工图.根据Malas稳定性准则确定出了非稳定区的位置及热变形最佳工艺参数:变形温度为800℃,应变速率为0.001s-1.
参考文献
| [1] | 刘莹,曲周德,王本贤.钛合金TC4的研究开发与应用[J].兵器材料科学与工程,2005(01):47-50. |
| [2] | WOOD R A;FAVOR R J.钛合金手册[M].重庆:科学技术文献出版社重庆分社,1983:46-47. |
| [3] | FRONT H J;ASHBY M E.Deformation Maps[M].New York:Pergamon Press,1982 |
| [4] | RAJ R .Development of a processing map for use in warm-forming and hot-forming processes[J].Metallurgical Transactions A,1981,12:1089-1097. |
| [5] | PRASAD Y V R K;GEGEL H L .Modeling of dynamic material behavior in hot deformation:forging of Ti-6242[J].Metallurgical Transactions(A),1984,15:1883-1892. |
| [6] | MALAS J C;SEETHARAMAN V .Using material behavior models to develop process control strategies[J].Journal of the Minerals Metals & Materials Society,1992,44:8-13. |
| [7] | ZIEGLER H.Thermomechanics[M].North-Holland:Amsterdam Press,1983 |
| [8] | Nho-Kwang Park;Jong-Taek Yeom;Young-Sang Na .Characterization of deformation stability in hot forging of conventional Ti-6Al-4V using processing maps[J].Journal of Materials Processing Technology,2002(0):540-545. |
| [9] | 潘雅琴,杨昭苏.TC4钛合金热压变形行为的研究[J].稀有金属材料与工程,1993(05):45-51. |
| [10] | Semiatin SL.;Weiss I.;Seetharaman V. .Hot workability of titanium and titanium aluminide alloys - an overview[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):1-24. |
| [11] | T. Seshacharyulu;S. C. Medeiros;W. G. Frazier;Y. V. R. K. Prasad .Hot working of commercial Ti-6Al-4V with an equiaxed α-β microstructure: materials modeling considerations[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2000(1/2):184-194. |
| [12] | BUSCHI S;POGGIO S;QUADRINI F et al.Workablity of Ti-6Al-4V alloy at high temperature and strain rates[J].Materials Letters,2004,58:3622-3629. |
| [13] | Ding R.;Guo Z.;Wilson A. .Microstructural evolution of a Ti-6Al-4V alloy during thermomechanical processing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,2002(2):233-245. |
| [14] | SELLARS C M;TEGART W J MCG .On the Mechanism of Hot Deformation[J].Acta Metallutica,1996,14(09):1136-1138. |
| [15] | Prasad YVRK.;Seshacharyulu T. .Processing maps for hot working of titanium alloys[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(1/2):82-88. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%