借助光学显微镜和透射电镜对2J4合金等径弯曲通道变形(ECAP)组织进行了研究.结果表明,常温下2J4合金ECAP变形的最大累积真应变达到3.0,相当于压下量达到90%.ECAP变形1道次后,晶粒由30μm转变为具有一定方向性、相互平行的宽约0.35μm、长约为2.5μm的马氏体板条组织.随着变形道次增加,马氏体进一步细化,且出现晶粒从大板条向小的板条及等轴晶转化的趋势.另外,α相转变量随着变形量的增大而增加.
参考文献
| [1] | 吴东鑫.新型实用传感器应用指南[M].北京:电子工业出版社,1998:55-63. |
| [2] | 柯成.金属功能材料词典[M].北京:冶金工业出版社,1999:7-8. |
| [3] | 崔忠忻.金属学与热处理原理[M].哈尔滨:哈尔滨工业大学出版社,1998:225-229. |
| [4] | S. M. Kim;J. Kim;D. H. Shin;Y. G. Ko;C. S. Lee;S. L. Semiatin .Microstructure development and segment formation during ECA pressing of Ti–6Al–4V alloy[J].Scripta materialia,2004(7):927-930. |
| [5] | Terence G. Langdon;Minoru Furukawa;Minoru Nemoto;Zenji Horita .Using equal-channel angular pressing for refining grain size[J].JOM,2000(4):30-33. |
| [6] | KORCHEF A;NJAH N;MASMOUDI J et al.Evolution of the mechanical properties of aluminum containing Al8Fe2 Si precipitates during equal channel angular pressing[J].Advances in Engineering Materials,2004,6(08):639-643. |
| [7] | Yoshinori Iwahashi;Jingtao Wang;Zenji Horita;Minoru Nemoto;Terence G. Langdon .Principle of equal-channel angular pressing for the processing of ultra-fine grained materials[J].Scripta materialia,1996(2):143-146. |
| [8] | Furukawa M.;Horita Z.;Nemoto M.;Langdon TG.;Iwahashi Y. .The shearing characteristics associated with equal-channel angular pressing[J].Materials Science & Engineering, A. Structural Materials: Properties, Misrostructure and Processing,1998(2):328-332. |
| [9] | 肖纪美.合金相与相变[M].北京:冶金工业出版社,1987:315-353. |
| [10] | 徐祖耀 .马氏体相变研究的进展和瞻望[J].金属学报(A),1991,27(03):161-172. |
| [11] | 吴建新;江伯鸿;徐祖耀 .含硼的Cu-Zn-Al合金中母相晶粒度和有序度对Ms的影响[J].金属学报(A),1989,25(02):98-104. |
上一张
下一张
上一张
下一张
计量
- 下载量()
- 访问量()
文章评分
- 您的评分：
-
10%
-
20%
-
30%
-
40%
-
50%